Ride on Mowers

A powerful and strong, towed, long grass cutter with a working width of 1070mm (42"). This unit is ideal for maintaining rough grassed areas, pasture land, woodland etc. A one piece roller mounted at the rear of the cutter alleviates scalping. The throttle control and safety engine emergency stop switch can be easily reached from the tractor seat. The 42 cutting flails are driven by two 'V' belts powered by a 9Hp Honda engine with electric start. The tow bar can be offset or can be central to the towing vehicle. Transport wheels and Adjustable clevis hitch fitted as standard.

All SCH Products are Built to order in the Uk Delivery time 3 to 6 Weeks

The heavy duty flail mower has been introduced to the range of SCH equipment to fulfil the need for a bigger unit for greater Hp tractors (18Hp and above). The main two differences between our small unit, the FM42 are firstly that it has a wider cut and secondly it has a centre positioned 13Hp Honda engine with electric start. This increase in engine size can more than adequately cope with the increased cutting width. The transport wheels are situated at the side of the machine. The safety of the operator is very much in mind when designing this type of machine. Full skirt guards are provided to stop the operators feet accidentally being offered to the flail. An emergency stop cord is fitted as standard. 50mm ball hitch fitted as standard Suitable for towing behind ATV'S and quads. The tow bar can be offset or can be central to the towing vehicle. Optional Transport wheels fitted at the rear.

All SCH Products are Built to order in the Uk Delivery time 3 to 6 Weeks

This very versatile three point linkage (Category 1) sprayer has an integral 12 volt diaphragm pump powered from the tractor battery. The sprayer illustrated has a capacity 70 litre and is supplied with a 4 nozzle spray boom and hand lance. The lance is ideal for spot application of weed killers to nettles and docks. The hand lance and boom are easily changed over by means of quick release couplings. All mounted sprayers are supplied with a 5 litre fresh water washing bottle.

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

This very versatile three point linkage (Category 1) sprayer has an integral 12 volt diaphragm pump powered from the tractor battery. The sprayer illustrated has a capacity 125 litre and is supplied with a 4 nozzle spray boom and hand lance. The lance is ideal for spot application of weed killers to nettles and docks. The hand lance and boom are easily changed over by means of quick release couplings. All mounted sprayers are supplied with a 5 litre fresh water washing bottle.

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

Category 1 three point linkage chain harrow, mounted. Working width 2440mm, (8') Photograph shows the 4' version.

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

The standard 1220mm width chain harrow mounted on a frame which incorporates category 1 three point linkage. The main advantages of this form of mounting is ease of transport, simple and easy clearing of debris from the tines, more manoeuvarable on corners and avoids over harrowing on the headlands.

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

The 3MMU is a three point hydraulic tractor mounted manege levelling unit. The 3MMU is fitted with a removable side mounted dozer attachment to 'pull in' the build up of material which accumulates on the edges. The front row of adjustable depth controlled spring tines tedder through the surface to alleviate any compaction build up.

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

The 3SR has four rows of heavy duty spring coiled tines, each row having twelve twin tines. The tines are staggered to give excellent coverage over the ground. The tines being spring mounted "jigger" over the ground, pulling and teasing out the dead thatch and matt. The 3SR is mounted on a three point linkage with standard category 1 link size. Other linkage categories can be supplied.

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

3 Point linkage mounted. A strongly constructed transport box with tipping facilities. The tailgate is removable.

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

For removing gravel, dirt and rubbish from hard surface such as asphalt and concrete. The 90cm working width and 32cm brush diameter are easy to adjust to achieve the best possible result. The removable collector has a volume of 59 litres with a maximum 15 kilos and is very easy to empty. The side brush is an excellent accessory for this sweeper since it gets close to walls and pavements.

Free Delivery

Thanks to the wide range of implements, your Park or Villa model becomes a year round companion.Towed, with a 5:1 wheel-to-brush rotation and a 107cm working width. Aluminium wheel transmission and heavy-duty bag stretcher.  Easy to empty from the driver's position.

The three point linkage mounted combination turf groomer is a multi tasking unit to groom pitches etc prior to use or at the finish of play.  It is also an ideal unit for general pitch grooming/maintenance. The leading star shaped slitter bar pierces the surface to increase drainage.  The brush and rake bars tickle over the surface to enhance the quality and appearance of the area.  The rear roller firms up the surface and gives that much sought after striping.

All three tools can be adjusted by individual screw jacks for depth and pressure.

A weight tray is incorporated in the design to allow top weight to be added if required.  This tray also acts as a useful general purpose carrier. 

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

The three point linkage mounted sorrel roller is a new addition to the sorrel roller range.  This multi spiked roller is especailly useful on large areas where a tractor has access.  The rear roller ads penetration weight to the system, if the rear roller is required a manual handle (supplied with each machine) must be fitted.

The frame has category 1 mounting as standard, category 2 is available on request.

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

The unit has a category 1 three point linkage frame. The multi surface manège groomer is ideal for both sand and fibre and sand and rubber surfaces.

Two rows of spring tines lift the sand whilst the two crumb rollers re-distribute the material evenly and leave the manège level and ready for work.

The 3MSMGT is height adjustable to allow you to get the correct depth for your surface. Once set, it can remain fixed at the height and there is no need to reset it ior to each use. This is because the wheels can be easily lowered to allow you to transport and store the groomer.

The standard width is 1500mm (60"). Other widths available on request.

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

  GREAT P/X Deal for January - Februarys

The Snapper SPX 275 is a high-quality lawn tractor that blends uniqueness with durability. Its wide 48"/122 cm CentreCut™ deck is manufactured from fabricated steel which is both tough and long-lasting.

The Snapper SPX 275 has a half-height baffle kit and eliminator blades fitted as standard to provide a superior cut, with an option of a full-height mulching baffle. Its rear discharge opening provides equal cutting on both sides of the tractor and allows closer cuts to be made when negotiating trees and similar garden obstacles. Also, the unwanted spread of grass onto footpaths and flower beds is prevented by the rear eject design.

Power is provided by a Briggs & Stratton 8230 Professional Series™ engine. This premium V-Twin cylinder unit provides efficiency and smooth running and has features including a full pressure lubrication system and spin-on oil system to enhance maximum engine life.

With its Tuff-Torq® K46 transmission, forward and reverse are easily controlled by the foot-operated pedal and allows the operator to keep both hands on the steering wheel, particularly useful for those trickier negotiations. The SPX 275 has cruise control, a major benefit when working on larger obstruction free areas. The comfortable contoured mid-back seat and ergonomic dashboard provide a comfortable driving environment.

The handy height of cut lever has 7 positions ranging from 38mm-110mm, whilst electric cutter engagement is made effortless by the dashboard-mounted control. Four support wheels protect the deck on uneven terrain and a wash port makes underside deck cleaning simple.

Manoeuvrability is enhanced thanks to its tight 36cm turning circle whilst a cast iron pivoting front axle and large 22" wheels maintain a smoother ride on uneven terrain A solid steel front bumper, LED headlights and a towing hitch comes as standard

Please check more details for post codes with a charge for delivery and how the P/X Works.

Free Delivery by our own Driver to your door fully built and ready to cut grass

Plus £250.00 Cash Back for your Old Ride on Mower working or not but must be complete.

Important!
The 48" frame must be purchased in order to use this system. 

The mounted frame will fit compact tractors fitted with category one three-point linkage fittings; other fittings configurations can be supplied.

The frame is designed that a tow bar can be fitted if required, making the frame easily converted for towing.

Overall width: 1750mm (69")

Un-ballasted weight : 60kg

Ballasted weight: 135kg

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

Ideal for use on paddocks, golf courses, football pitches, race tracks etc.

The system gives the advantages of all the benefits of aeration and slitting, allowing air into roots, to assist drainage and slow down the build-up of thatch.

(Ref DMF)

The Frame has category 1 three-point linkage tractor mounting as standard, other categories can be supplied on request - please call.  A weight tray is incorporated in the design which gives a facility to add top-weight to gain required penetration.  This tray is also extremely useful for the transportation of tools etc.  For safety purposes, a rear mesh guard cover is fitted.  The floating roller will push back any plucked divots without closing the penetrations; the roller can be lifted out of work if required.  An adjustable scraper bar is fitted to the rear of the roller.

Overall Width: 1780mm (70")

Weight: 170kg

Maximum ballast added to weight tray: 250kg (550lbs)

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

For use with the carrying frame Ref DMF

This hollow tine corer bolts onto the carrying frame in the same way as the aerator or slitter.  The revolving discs fitted with hollow spoon tines delve into the turf surface to remove, on average, a 75mm (3") core.  Removing cores from turfed areas allows air and water to have direct access to the root system; if lawn sand is applied the core holes will fill with sand to give the maximum advantage to the root system.

The rear roller is lifted out of work for this operation.

Working Width: 1500mm (60")

Main shaft bearings: 50mm

Maximum core depth: 75mm (3")

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

For use with the carrying frame Ref DMF

The dethatcher attachment fits onto the rear of the multi-tool frame.

The two rows of heavy-duty spring tines draw through the surface to remove all unwanted thatch and dead grass to promote new and healthy growth.

Working width: 1500mm (60") 

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

To be used with carrying frame DMF 

Nine heavy-duty aeration discs on 50mm stainless steel axle c/w bearings, easily bolts onto the carrying frame.  The discs will penetrate up to 180mm (7") in suitable conditions.

Working Width: 1500mm (60")

Number of discs: 9

Maximum penetration: 180mm (7")

Main Shaft & Bearings: 50mm

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

For use with Carrying Frame Ref DMF

Nine heavy duty slitter 'stars' on a 50mm stainless steel axle c/w bearing easily bolts to the carrying frame.  Up to 125mm (5") can be achieved in suitable conditions; extra weight may be added if required.

Working width: 1500mm (60")

Main shaft bearings: 50mm

Maximum depth: 125mm (5")

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

For use with Carrying Frame Ref DMF

The fine turf slitter is equipped with slender hardened blades with knife edges.  This gives a clean penetration into the soil leaving the surface free from any turf tearing or plucking.

The blades when requiring replacement can have new ones bolted on.

Working width: 1500mm (60")

Number of discs: Nine

Blades per disc: Five

Penetration Depth: Depending on soil condition up to 150mm (6")

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

For use with the carrying frame Ref DMF

The sorrel roller is an excellent tool for spiking the surface of fine turf prior to reseeding.

Working width: 1500mm (60")

Roller diameter (without tines): 200mm (8")

Tine penetration: 63mm (2.5")

Number of tines: 280

Roller weight: 35kg

All SCH Products are Built to order in the Uk. Delivery time 3 to 6 Weeks

Maxislit

The SISIS Maxislit, with its deep slitting aerators allows for cleaner penetration with minimal surface disturbance. This innovative design improves drainage,reduces thatch build up, turf compacting and boosts the general health of lawns.

Not only is this tractor mounted deep slitting lawn aerator perfect for the maintenence of sports fields, including rugby, football, cricket pitches and golf courses, it is also an outstanding tool for turf and lawn treatment. 

The excellent spiral design of the tine shaft, along with the angle of the tines allows for cleaner penetration and also requires little maintenance. 

LOCAL DELIVERY AVAILABLE

MEGASLIT

The Megaslit deep slitting lawn aerator is the perfect piece of machineery for large sports field maintenance golf courses, football, soccer rugby and cricket pitches. Its aeration is an essential element for improving drainage, reducing turf compacting and thatch build up, making it an ideal tool for turf and lawn treatment. 

The angle of the tines and the great design of the spiral tine shaft allows for maximum underground cultivation with minimal surface distrubance, this simple design assists with penetration and requires little maintenance.

FREE LOCAL DELIVERY

Multislit 1200

The SISIS Multislit is a tractor mounted deep slitting lawn aerator for sports field maintenance, fine turf and amenities, offering deep, clean penetration with minimal surface disturbance. Suitable for maintenance of football, soccer rugby and cricket pitches and golf courses, it can also be used for lawns and gardens.

Aeration is a key process to improve drainage, reduce turf compacting, thatch build up and boost the health of lawns and the Multislit is an ideal tool for outstanding turf and lawn treatment.

The Multislit produces excellent underground cultivation due to the angle of the tines and spiral design of tine shaft assist penetration and its simple design requires little maintenance.

LOCAL DELIVERY AVAILABLE

Multislit 1500

The SISIS Multislit is a tractor mounted deep slitting lawn aerator for sports field maintenance, fine turf and amenities, offering deep, clean penetration with minimal surface disturbance. Suitable for maintenance of football, soccer rugby and cricket pitches and golf courses, it can also be used for lawns and gardens.

Aeration is a key process to improve drainage, reduce turf compacting, thatch build up and boost the health of lawns and the Multislit is an ideal tool for outstanding turf and lawn treatment.

The Multislit produces excellent underground cultivation due to the angle of the tines and spiral design of tine shaft assist penetration and its simple design requires little maintenance.

LOCAL DELIVERY AVAILABLE

Multitiner 1.8m

The SISIS Multitiner 1.8m is a tractor mounted drum-type aerator for fine turf which is ideally suited to a range of applications from sports field maintenance lawns and amenities. It can be used for maintaining cricket pitches, golf courses, lawns and gardens.

Aeration is important to improve drainage, reduce turf compacting, thatch build up and boost the health of lawns and the Multitiner 1.8m will serve your aeration needs to provide top class lawn treatment.

It has three drums with independent rotation and is low maintenance, its interchangeable tines with a maximum depth of 100mm ensuring excellent lawn care when the time comes to aerate.

LOCAL DELIVERY AVAILABLE 

Multitiner 1.2m

The SISIS Multitiner 1.2m is a tractor mounted drum-type aerator for use on fine turf and sports fields, and it is well suited to a range of applications from sports field maintenance to lawns and amenities. It can be used for maintaining football and soccer pitches, cricket pitches, golf courses, lawns and gardens.

Effective aeration improves drainage, reduces turf compacting, thatch build up and boosts the health of lawns and the Multitiner 1.2m is an ideal tool to provide top class lawn treatment.

It has three drums with independent rotation and is low maintenance and its interchangeable tines with a maximum depth of 100mm ensuring excellent lawn care when the time comes to aerate.

LOCAL DELIVERY AVAILABLE

Rolaspike

The Rolaspike is a tractor mounted sarel type roller which is ideal for surface aeration assisting with the absorption of water, air and nutrients into the turf. Also useful as part of an overseeding programme preparing the surface for seed.

LOCAL DELIVERY AVAILABLE

Rolaspike

The Rolaspike is a tractor mounted sarel type roller which is ideal for surface aeration assisting with the absorption of water, air and nutrients into the turf. Also useful as part of an overseeding programme preparing the surface for seed.

LOCAL DELIVERY AVAILABLE

Rolaspike

The Rolaspike is a tractor mounted sarel type roller which is ideal for surface aeration assisting with the absorption of water, air and nutrients into the turf. Also useful as part of an overseeding programme preparing the surface for seed.

LOCAL DELIVERY AVAILABLE

Javelin Aer-Aid 1500

The Javelin Aer-Aid machine is a specially designed tractor mounted vertical action aerator for use on both fine and outfield turf.

The machine can be used all year round due to the large selection of tines helping to break up compaction allowing water, air and nutrients to penetrate the root zone.

Consistent use helps to produce a surface that is less affected by the adversities of weather conditions leaving minimal disturbance.

The Aer-Aid system injects air directly into the root zone speeding up the aeration process, moving air uniformly throughout the root zone for complete aeration – not just where the tines have penetrated.

The cam trigger mechanism ensures that the air is always expelled at the bottom of the tine penetration enabling treatment to be targeted precisely.

LOCAL DELIVERY AVAILABLE

Veemo MK2 Scarifier

The SISIS Veemo MK2 is a purpose designed, triple mounted hydraulic driven scarifier using strong cutting blades for maximum thatch removal and minimum surface disturbance.

The three independently floating heads follow ground contours closely without scalping. Depth of cut is infinitely variable by means of a locking micro–adjuster on each unit.

A choice of 1mm or 2mm  tungsten tipped blades are available to carry out scarification and verticutting requirements.

LOCAL DELIVERY AVAILABLE 

Rotorake TM1000

A specially designed tractor mounted unit with a choice of five quick release interchangeable reels to aid the removal and control of thatch and help to reduce standing surface water by improving water infiltration.

Features include a contra rotating reel for a clean consistent performance with a selection of various blades to suit key tasks.

The weight of the collection box and material is carried by the main frame on the front roller and independent from the reel, so when in use the additional weight does not force the reel to scarify deeper than has been set.

LOCAL DELIVERY AVAILABLE 

Litamina 1200

The SISIS Litamina 1200 is a compact sweeper for efficient collection of unwanted debris from sand filled or rubber crumb synthetic surfaces.

With its spiral design brush helping to stand up the pile and improve collection, and a large capacity mesh hopper collecting debris but allowing infill to be returned the surface, the Litamina 1200 are ideal for helping to keep surfaces free of contamination and harmful debris.

LOCAL DELIVERY AVAILABLE 

Litamina 1500

The SISIS Litamina 1500 is a compact sweeper for efficient collection of unwanted debris from sand filled or rubber crumb synthetic surfaces.

With its spiral design brush helping to stand up the pile and improve collection, and a large capacity mesh hopper collecting debris but allowing infill to be returned the surface, the Litamina 1500 is ideal for helping to keep surfaces free of contamination and harmful debris.

LOCAL DELIVERY AVAILABLE

Litamisa 1800

The SISIS Litamisa 1800 is a tractor mounted sweeper and collector for collecting a wide range of surface debris from large areas. Effective sweeping brushes lend itself well to sports field maintenance and amenities. It is suitable for maintenance of golf courses, football, soccer rugby, cricket pitches, lawns and gardens.

Sweepers are essential to clear large areas of debris and materials including leaves, pine needles, litter and thatch as part of ground maintenance and turf care. The SISIS Litamisa is ideal for sweeping requirements, from large sports fields to gardens and extensive lawns.

The SISIS Litamisa has a spiral design brush for improved collection, a hydraulic tip facility for easy emptying and a large capacity hopper. It follows ground contours and is simple to use and maintain.

LOCAL DELIVERY AVAILABLE

Powaspred Top Dresser

The SISIS Powaspred will spread most free flowing materials including sand, loam, rock salt, rubber crumb and hard porous dressings at the desired rate with an even consistent spread.

LOCAL DELIVERY AVAILABLE

Variseeder 1300

A compact and versatile tractor mounted overseeder ideal for renovation and repair work.

The studded roller prepares the seedbed by creating thousands of little “plant pots” to receive the seed without linear grooves that can disturb play.

Variable seed rates and options on discharge rollers allow different seed varieties to be introduced to the sward.

LOCAL DELIVERY AVAILABLE

Flail mower for STIGA Park 2 + 4WD front cut ride-on mowers.

• Compatible with some STIGA Park models and all Park Pro models
• 1 years of warranty from purchase date
• Free Delivery

Front brush for 2 + 4WD front cut ride-on mowers.

• 30 cm brush diameter
• 85 cm operating width
• 1 years of warranty from purchase date
• Free Delivery

130 cm rear rake for STIGA Park Pro front cut ride-on mowers.

• 130 cm operating width
• Compatible with the Park Pro
• 1 years of warranty from purchase date
• Free Delivery

protective cover for front cut ride-on mowers.

• For use with all STIGA front-cut ride-on mowers
• 1 years of warranty from purchase date
• Free Delivery

Hydraulic brush for STIGA Park Pro 740 IOX front cut ride-on mowers.

• 45 cm brush diameter
• 100 cm operating width
• Compatible with the Park Pro 740 IOX
• 1 years of warranty from purchase date
• Free Delivery

Flail mower roller axle with electrical adjustment for STIGA Park 2 + 4WD front cut ride-on mowers.

• Compatible with some STIGA Park models and all Park Pro models
• 1 years of warranty from purchase date
• Free Delivery

Aerator roller axle with electrical adjustment for STIGA Park 2 + 4WD front cut ride-on mowers.

• Compatible with some STIGA Park models and all Park Pro models
• 1 years of warranty from purchase date
• Free Delivery

Sand spreader for STIGA Pro garden tractors, including front cut ride-on mowers.

• Compatible with the Park Pro, Estate Pro and Tornado Pro
• 1 years of warranty from purchase date
• Free Delivery

Galvanised Pro Cart for front cut ride-on mowers.

• 50-100 kg capacity
• Compatible with all front cut ride-on mowers
• 1 years of warranty from purchase date
• Free Delivery

Side brush for STIGA Park front cut ride-on mowers.

• Compatible with the Park 540 DPX and Park Pro
• 1 years of warranty from purchase date
• Free Delivery

Aerator for STIGA Park 2 + 4WD front cut ride-on mowers.

• Compatible with some STIGA Park models and all Park Pro models
• 1 years of warranty from purchase date
• Free Delivery

Plastic Combi Cart with 180 litre capacity for use with garden tractors, including front-cut models.

• 180 litre capacity
• Standard connection
• 1 years of warranty from purchase date
• Free Delivery

Winton WTM110 Topper Mower 110cm Cutting Width

Perfect for paddock maintenance and cutting overgrown grass, weeds, light scrub and saplings. Direct drive to suit lower-horsepower tractors. Rotary blades slice the top off grass and weeds

• Cutting Width 110cm
• HP Range 16-25
• Weight 175 kg
• Height-adjustable skids for optimal control
• Shear bolt PTO shft for enhanced safety
• Multiple A-Frame Positions
• Adjustable cutting Height ange of 5-25cm
• Direct drive blades
• Low maintenance and easy to use
• Free Delivery

Winton WTM140 Topper Mower 140cm Cutting Width

Perfect for paddock maintenance and cutting overgrown grass, weeds, light scrub and saplings. Direct drive to suit lower-horsepower tractors. Rotary blades slice the top off grass and weeds

• Cutting Width 140cm
• HP Range 23-40
• Weight 205 kg
• Height-adjustable skids for optimal control
• Shear bolt PTO shft for enhanced safety
• Multiple A-Frame Positions
• Adjustable cutting Height ange of 5-25cm
• Direct drive blades
• Low maintenance and easy to use
• Free Delivery

Winton WTM160 Topper Mower 160cm Cutting Width

Perfect for paddock maintenance and cutting overgrown grass, weeds, light scrub and saplings. Direct drive to suit lower-horsepower tractors. Rotary blades slice the top off grass and weeds

• Cutting Width 160cm
• HP Range 25-50
• Weight 220 kg
• Height-adjustable skids for optimal control
• Shear bolt PTO shft for enhanced safety
• Multiple A-Frame Positions
• Adjustable cutting Height ange of 5-25cm
• Direct drive blades
• Low maintenance and easy to use
• Free Delivery

Winton WFM120 Finishing Mower 120cm Cutting width

Ideal for regular mowing of large areas, including sports pitches, parks and formal grass areas. Three blades for smooth operation, giving a superior lawn-style finish. Ideal for Golf Courses, Sports pitches, Lawns, Parklands.

• Height-adjusting wheels for a cutting-height of 2-8cm
• Floating linkage allows for varying contours & gradients
• HP Range 16-30
• Weight 178kg
• Lower link-arm extensions to avoid fouling tractor wheels
• Simple to access grease points
• Rear-style discharge to evenly disperse clippings
• Drive-belt tensioning
• Free Delivery

Winton WFM150 Finishing Mower 150cm Cutting width

Ideal for regular mowing of large areas, including sports pitches, parks and formal grass areas. Three blades for smooth operation, giving a superior lawn-style finish. Ideal for Golf Courses, Sports pitches, Lawns, Parklands.

• Height-adjusting wheels for a cutting-height of 2-8cm
• Floating linkage allows for varying contours & gradients
• HP Range 20-45
• Weight 187kg
• Lower link-arm extensions to avoid fouling tractor wheels
• Simple to access grease points
• Rear-style discharge to evenly disperse clippings
• Drive-belt tensioning
• Free Delivery

Winton WFM180 Finishing Mower 180cm Cutting width

Ideal for regular mowing of large areas, including sports pitches, parks and formal grass areas. Three blades for smooth operation, giving a superior lawn-style finish. Ideal for Golf Courses, Sports pitches, Lawns, Parklands.

• Height-adjusting wheels for a cutting-height of 2-8cm
• Floating linkage allows for varying contours & gradients
• HP Range 25-55
• Weight 202kg
• Lower link-arm extensions to avoid fouling tractor wheels
• Simple to access grease points
• Rear-style discharge to evenly disperse clippings
• Drive-belt tensioning
• Free Delivery

Winton WCF85 Flail Mower 85cm Cutting Width

Lightweight body for lower-horsepower tractors. Robustly built and fitted with hammer blades, making them suitable for thicker materials. Flail blades mulch up the grass cuttings. Ideal for Orchards & Vineyards, Allotments, Weed Control, Pastures and Paddocks.

• Spirally arranged hammer blades for an efficient cut
• Compact design for tight spaces & sub-Compact Tractors
• Adjustable cutting-height range of 3-8cm
• adjustable positioning for skids & roller
• HP range 12-20hp
• Weight 110kg
• Free Delivery

Winton WCF105 Flail Mower 105cm Cutting Width

Lightweight body for lower-horsepower tractors. Robustly built and fitted with hammer blades, making them suitable for thicker materials. Flail blades mulch up the grass cuttings. Ideal for Orchards & Vineyards, Allotments, Weed Control, Pastures and Paddocks.

• Spirally arranged hammer blades for an efficient cut
• Compact design for tight spaces & sub-Compact Tractors
• Adjustable cutting-height range of 3-8cm
• adjustable positioning for skids & roller
• HP range 15-25hp
• Weight 130kg
• Free Delivery

Winton WFL105 Heavy duty Flail Mower 105cm Cutting Width

Heavy-duty design makes these flail mowers great all-rounders for a wide range of applications. The heavy hammer blades are suitable fo long grass and heavier scrub materials. Flail blades mulch up the grass cuttings and give a close cut. Ideal for overgrown fields, Weed control, Smallholdings, Pasture & Paddocks, Parklands, Orchards & Vineyards, Sports Pitches.

• Robust heavy-duty gearbox
• Spirally arranged hammer blades for an efficient cut
• Heavy hammer blades
• Adjustable positioning for skids
• Height-adjustable roller
• Adjustable cutting-height range of 3-8cm
• Weight 210kg
• HP range 18-30
• Free Delivery

Winton WFL125 Heavy duty Fl