Rotavators / Tillers Garden Care Equipment

The Grillo GZ1 is equipped with an active coupling device: if you depress the lever on the handle, you will engage the tines. When the lever is released the tines stop immediately whilst the engine will keep on running.
The side discs should not be used when you till on hard soil that has not been previously tilled.
The side discs are very useful on soft soil, they help to keep the machine in a straight line and also protect the plants around the area being tilled. 

This model is compact, and is ideal for tilling the ground near to corners or in confined spaces.
The tiller has a width of just 57 cm. 

The tines turn even when the tiller is not moving forward enabling you to put the machine into reverse with very little effort.

The tiller is fitted as standard with two different spurs: one is suitable for soft soil while the other is suitable for hard soiI. The spurs adjustment determines the machines working depth.
A low adjusted spur will make the tines dig deeper into the soil.

A high adjusted spur will move the centre of gravity forwards and the machine will move forwards more rapidly.
The use of side discs together with a high adjusted spur will increase the uplift and advancement.
The GZ1 is fast, well-balanced and precise!
The gearbox which is in an oil bath ensures maximum strength and longevity. It was completely designed and manufactured by Grillo in their own facility.The 3 HP engine ensures the optimum torque for tilling at 2400 rpm ! You can till slowly starting at 80 – 90 rpm or rapidly up to 155 rpm, depending on the soil's condition and the required tilth.
The engine power is no obstacle for the GZ1, even if you till in depth with the tiller at its maximum width and completely embedded into the soil.
The handlebar is side adjustable without the need to loosen screws or turn knobs. This is facility is necessary to avoid walking on the tilled ground or whilst working close to hedges, fences, or under branches.

Free Delivery Built up and Ready to Use

The Grillo GZ2 is powered by a Briggs & Stratton 575EX OHV engine with a manual recoil starter.

The standard machine comes with 4 tines and side discs,with a working width od 52cm

Free Delivery Built up and Ready to Use

Grillo G Z3 Petrol Rotavator (80161N)

Powered by a Honda GCV170 OHC Engine

Forward and Reverse with 6 tines and side discs with a working width of 75cm.

Free Delivery Comes built up and Ready to Use.

Grillo Princess MR Petrol Rotavator (87L9T)

1 forward + 1 reverse gear

Gear housing in press-formed plate sections secured by bolts

Belts in kevlar (high performance)

Handlebar easy to control and fully adjustable

Rotary tiller with 6 hoes plus disks (total width 80 cm)

Front transport wheel supplied as standard

Free Delivery Comes built up Ready to Use

Grillo Princess MR Petrol Rotavator (87LBF)

1 forward + 1 reverse gear

Gear housing in press-formed plate sections secured by bolts

Belts in kevlar (high performance)

Handlebar easy to control and fully adjustable

Rotary tiller with 6 hoes plus disks (total width 80 cm)

Front transport wheel supplied as standard

Free Delivery Comes Built up Ready to Use

The Princess M1 Gear housing in press-formed plate sections secured by bolts, the Belts in kevlar (high performance) Handlebar easy to control and fully adjustable, Rotary tiller with 6 hoes plus disks (total width 80 cm) Front transport wheel supplied as standard

Free Delivery Comes Built up and Ready to Use

The Princess MP3 is powered by a Honda engine with 2 forward + 1 reverse gear, Gearbox casings made from pressed and bolted steel,Belts made of kevlar (high resistance) Comfortable handlebar incorporating all controls, very solid and adjustable tiller, front transport wheel included as standard equipment

Free Delivery Comes Built up Ready to Use

A compact but powerful machine, this cultivator has a 100cc Mountfield RSCT 4 stroke engine, four 245mm diameter rotors, a 36cm working width and adjustable handles to ensure a comfortable working position. Recently awarded a Best Buy by Amateur Gardening, scoring full marks in their review.
Free Delivery.

The Grillo G45 is a compact walking tractor, ideal for working in narrow spaces both in horticulture or gardens.
Perfectly balanced, it is fitted with a 2 speed- gearbox with gears in oil-bath and a forward and a reverse gear.
Due to the several devices, this walking tractor can be used by inexperienced people too.
The counter - rotating tines till even the hardest soil in spite of its reduced sizes and light weight.
The tines and wheels move in opposite direction allowing the walking tractor to perfectly adhere to the ground enabling the user to work with minimum effort. There is no need to push down hard on the handlebar, just allow the walking tractor to move forwards under its own power.  

Free Delivery Comes built up and Ready to Use

Grillo G 46 is an innovative walking tractor, ideal in horticulture and gardening.
Thanks to its compact dimensions, it works easily in narrow spaces.

G 46 is perfectly balanced, fitted with an oil-bath gearbox with one forward gear and one reverse gear. 
A very comfortable lever is used to shift from the forward to the reverse gear.In spite of its reduced weight and dimensions, the contra-rotating tiller grinds even the hardest soil. 
One hand is enough to till with the G46, the contra-rotating tiller allows the walking tractor to perfectly adhere to the ground.The width of the tiller is 50 cm and its tempered steel tines have a diameter of 26 cm.
Tilling depth can be changed into 5 different positions by adjusting the rear skid.
This skid is particularly useful for works on sandy and soft soils, because it prevents the tiller from sinking excessively into the ground.

Free Delivery Comes Built up and Ready to Use

If you grow your own vegetables, preparing the ground can be hard work and time consuming. The Stiga SRC 550 RB Cultivator can help you to complete any heavy digging easily and in a fraction of the time.  This machine is easy to use and sufficiently suitable for smaller plots. The 125cc Briggs & Stratton 450 Series engine powers four 260mm diameter rotors with a 50cm working width and 20cm cultivating depth. The adjustable handles ensure a comfortable working position and the machine is easy to move to and from the working area using the two rear transport wheels and two drive gears, 1 forward and 1 reverse.

Free Delivery

The Grillo G52 is a reversible, compact walking tractor, suitable for working in limited spaces both in horticulture and in gardening.
It is equipped with a 2 speed-gearbox with gears in oil-bath with forward and a reverse gear. It’s a comfortable walking tractor, easy to use and safe.
Several rear and front attachments can be connected to the machine, thanks to its 180° reversible handlebar: rotary tiller, sickle bar, mower etc. can be fitted via a coupling without the help of tools.
It is possible to achieve greater stability on slopes by widening the wheel track by 10 or 17 cm by means of the appropriate Grillo wheel extensions. 

Free Delivery Comes built up and Ready to Use

The Grillo G55 is an appropriate walking tractor for all kind of works on medium-sized areas.
It is fitted with a 4 speed-gearbox with gears in oil-bath, with 2 forward and 2 reverse gears.
G55 is an easily manoeuvrable and safe machine and offers the possibility to attach several front and rear-mounted attachments. Its handlebar can be reversed through 180° via a lever. The attachments can be connected through a coupling without the need to use tools. There is also the possibility to attach a plough kit containing large wheels, adjustable extensions, 180° turn-wrest plough and wheel weights.
It is possible to achieve a greater stability on slopes by widening the wheel track by 12 or 24 cm by means of the appropriate Grillo wheel extensions. 

Free Delivery comes Built up and Ready to Use

The Grillo G84 is an ideal walking tractor for works in horticulture, orchards, vegetable plots and in gardening. It is a robust machine ideal to work on any kind of soil.
G84 is fitted with a 4 speed-gearbox in oil-bath, with 2 forward + 2 reverse gears.
Several front and rear-mounted implements can be applied to this machine, due to its 180° reversible handlebar, such as standard rotary tiller, counter – rotating tiller, sickle bars and furrow behind the rotary tiller.
These attachments can be connected to the machine through a solid flanged coupling.  

Free Delivery Comes built up and Ready to Use

The Grillo G85d is an appropriate walking tractor for working in horticulture, orchards, vegetable plots and for gardening in medium-sized and large areas.
It is fitted with a 4 speed- gearbox with gears in oil-bath, with 2 forward and 2 reverse gears. The differential lock comes as a standard feature. Due to the several safety devices it is fitted with, this walking tractor can be safely used. Thanks to the possibility to reverse the handlebar through 180°, a lot of front and rear-mounted attachments can be connected to the machine, such as: rotary tiller, sickle bar, all purpose flail, snow thrower etc. via either a flanged coupling or through a quick coupling for which no tools are needed.
A plough kit is available too and includes larger wheels, adjustable extensions, a 180° turn-wrest plough and wheel weights.
To achieve a greater stability on slopes, it is possible to widen the wheel track up to maximum 25 cm by using fixed or adjustable wheel extensions.

Free Delivery Comes Built up and Ready to Use

The Grillo G 107 d is a walking tractor equipped with a reversible handlebar and ideal for working on medium-sized areas. The six-speed gearbox with gears in oil-bath 3 forward gears and 3 reverse gears. The differential lock comes as a standard feature on this machine.
The G 107 d is also fitted with an automatic quick gear-inverter, a device that manages the drive when turning the handlebar of 180°.
The reverse gear handlebar is placed on the handlebar, and is easily achievable.
Together with its broad offer implements and its reversible handlebar, G 107 d turns out to be an extremely versatile walking tractor.
The implements can be attached via a flanged coupling or a quick coupling, available as an extra, without the need of tools.
A plough kit containing larger wheels, adjustable extensions, 180° turn-wrest plough and wheel weights is available as an optional attachment.
To achieve a greater stability on slopes you can widen the wheel track up to 25 cm by using the appropriate fixed or adjustable Grillo wheel extensions.  

Free Delivery Comes Built up Ready to Use