Garden Care Equipment

NB: This item and the price quoted are for the suction unit only - please see the SCH trailer category for a selection of suitable collection trailers. This large leaf suction unit is hungry to clear up large areas of fallen leaves. The PSU fan unit with its powerful 9hp Honda engine is mounted on a two wheel chassis with an integral tow bar . The favourite way of using the unit is to attach it to the rear of the leaf collecting trailer. This trailer can be supplied with trailer adaptation kit, you could modify your own trailer. The discharge hose is attached to the rear of the trailer. The operator this is able to suck up fallen leaves efficiently. A combined team of the suction hose operator and a tractor driver can clear along drives and road edges at very impressive speeds. The leaves passing through the fan are chopped up, greatly increasing the capacity of the trailer - meaning less empties per day. Many operator use this in conjunction with a hand held blower. Blow out leaves from flower beds and arkward areas and then collect them with the suction unit. The fan belt is driven and not fitted directly onto the crankshaft of the engine.

Free Delivery

This large capacity trailer has been devolped by SCH to tow behind tractors having the description known as 'twin cut'. These tractors have a centre rear discharge blowing the cut grass/leaves into a limited size collection hopper. Frequent emptying is extremely time-consuming and frustrating. The TRCL greatly increases the collecting capacity and therefore larger areas are collected in one fill, quicker, time saving and a great cost saving in labour. The powerful motorised fan unit mounted on the front of the TRCL sucks up the green waste from the cutter deck and propels it into the trailer. The trailer has a low centre of gravity, which makes it extremely stable on hilly ground. A deflector plate on the discharge shoot is adjustable for even loading of different kinds of material. The trailer having a low centre of gravity is not able to be tipped for emptying, however a web strap anchored at one end, when pulled removes most of the waste from the TRCL via a large rear hinged tail gate. Wide profile pneumatic wheels greatly reduce wheel markings on soft ground. The TRCL can also be used on level tarmac and gravel surfaces.

Free Delivery

SCH Wandering Hose for use with Large Capacity Trailed Collector (TRCL) and Professional Leaf Suction Unit (PSU)

Free Delivery

The SCH TS98 lawn sweeper/collector is robust in construction to withstand prolonged heavy use. A differential mechanism on the brushes allows the sweeper to be manoeuvred in tight corners without the wheels "scuffing". The differential mechanism also allows both ground wheels to drive the pick up brushes giving it superior sweeping power. The height adjustment is simple. The main drive is transmitted via metal gears. The large capacity solid plastic catcher is rot and tear proof and simple to use. Reversing into the tipping heap is always difficult but it is made easier with the TS98 as it only has two wheels in contact with the ground. A useful collection sheet is supplied with each unit.

Free Delivery

This SCH HSTS98 sweeper benefits with a sprung floor, to allow the sand to flow back through the base of the hopper, at the same time collecting debris such as leaves, and twigs. A differential mechanism on the brushes allows the sweeper to be manoeuvered in tight corners without the wheels scuffing; height adjustment is simple. Both wheels drive the pick up brushes giving excellent sweeping power. The main drive is transmitted via metal gears. A cover plate is supplied with each machine, to cover the mesh floor in sweeping operations where all debris is required to be collected. (Please see pictures)

Free Delivery

The SCH EPB Poo Picker is ideal for the regular removal of droppings and promotes healthy grass and helps reduce droppings related diseases. Four rows of height adjustable brushes rotate at variable speeds to flick the droppings into the rot proof rear collecting box. The brushes are driven by a 5.5Hp Honda engine equipped with a speed reduction gear box which incorporates a centrifugal clutch, this means when the engine speed is reduced the brushes stop revolving, a necessary feature when moving from heap to heap. The Equestrian Powered Brush can also be used for other sweeping tasks e.g. car parks etc. The tow hitch is fitted with a 50mm ball hitch. The brushes are easily changed when they become worn. Designed for small Equestrian centres and private paddock owners.

This version of the SCH PSU is supplied on a two wheel chassis having suspension units and requiried lighting. The hand held suction nozzle is fitted to three meters of 200mm diameter hose. The discharge is via a metal tube with a swivel base to allow the direction to be altered. The discharge head is also adjustable. A jockey wheel and 50mm ball hitch is fitted as standard. The fan belt is driven and not fitted directly onto the crankshaft of the engine.

Free Delivery

The popular SCH PSU leaf sucker is now available as an all in one unit, fixed to one of our 15cwt trailers. The trailer can be pulled by small tractors, ATVs and RTVs. The unit has an 8" diameter collection hose and has a hand handle to make for comfortable operation. The TPSU range of leaf suckers can cope with large quantities of leaves being drawn up and then chopped by the fan. This means that much smaller pieces go into the trailer thereby effectively increasing capacity due to there being fewer trips to empty. If wet leaves or other debris block the inlet, cleaning is simple via the removal of just one bolt. There is also an inspection door fitted with a safety interlocking switch. The fan is belt driven so there is no shock loading on the crankshaft. The tips of the fan itself are easily and cheaply replaceable. The trailer is narrow enough to fit down small paths and when not being used to collect leaves, the suction unit can be removed thus supplying you with a trailer for a multitude of other purposes.

Free Delivery

Broadcasting guard (for salt and sand spreading) can be fitted to TBS50/TBS100

Hand operation handle for TBS50 and TBS100 Broadcasters.

This popular broadcaster/ spreader has a generous 60 kg hopper size. The pneumatic wheels allow the unit to be easily pushed over the surface. An adjustable feed control makes it very suitable for the spreading of seed, fertiliser and salt. A shower proof cover is supplied with this product. When used with salt the spreader helps to keep work areas safe in adverse weather. Only free flowing bagged salt should be used.

A 60kg hopper and pneumatic wheels. this unit can be easily pushed or towed over the surface giving excellent drive grip. An adjustable speed control makes it very suitable for the spreading of flow, fertiliser and salt. A shower proof cover is supplied with these units. When used with salt the spreader helps to keep work areas safe in adverse weather.

The ATV/Quad mounted sprayers are designed to fit onto the ATV's storage bars. 70 litre capacity tanks only, are suitable for the Q4PS. The sprayer has an integral 12 volt diaphragm pump powered by the quads own battery via a connection lead. The sprayer has a capacity of 70 litres and is supplied as standard with a hand lance and a 4 nozzle boom. The lance is ideal for spot application of weed killers to nettles and docks. The lance and boom are easily changed over by means of quick release couplings. All mounted sprayers are equipped with a 5 litre fresh water washing bottle.

Free Delivery

The GWCS9 is a versatile sprayer for applying herbicides and fertilisers to both large and small areas with ease. Th four nozzle spray boom is one of the main features of the sprayer. The two outside nozzles are fitted to a break back section of the boom. When the operator accidentally navigates the boom into a solid object, a tree, garden bench or similar the outside section of the boom will fold back minimising the risk of damage. The two outside nozzles can be individually isolated to give a narrow spray width from the centre two nozzles. The spray boom is height adjustable to accommodate different towing heights. The whole boom lifts off for safe storage. The 12 volt diaphragm pump is powered from the tractor battery. In line filters are incorporated to prevent, as far as possible, irritating stoppages from blocked nozzles. The spray nozzles are mounted on anti drip holders which means that when the pump is 'shut down' liquid does not continue to flow. A brass hand trigger lance, complete with quick and simple twist connectors, is supplied with each sprayer. The lance is invaluable for spot spraying and around trees, shrubs etc. A 5 litre wash bottle is mounted on the chassis of the sprayer for dowsing down in case of skin contact with spray liquid. The maximum spray width is 2440mm (96") with two wing booms folded back and switched off, the spray width reduces to 1220mm (48").

Free Delivery

The DCRCA is a chemical applicator which can be fitted to the De-compaction Rake to apply required chemicals to long fibre synthetic sports surfaces of which 3G is the most common at this time. The chemical is applied by a dribble/drip bar mouted in front of the row of scarifying tines. The object is to apply the chemical and then the tines will open up the surface to allow it to reach the required areas. Flow rates can be adjusted to suit the required application rate. Power to the pump is supplied from the towing unit. An independednt battery may be fitted if required.

Free Delivery

This sprayer is mounted on a strong four wheel chassis. Two static wheels at the front with two castors at the rear which makes this unit extremely manoeuvrable. The four nozzle boom which can be removed for transport or storage is height adjustable and has a 'break back boom' feature. On contact with solid objects the boom will forld, minimising risk of damage. The two outside nozzles can be individually isolated to give a narrow spray width. Also supplied as standard is a brass hand lance for spot spraying.

Free Delivery

The sprayer is mounted on a three wheel robust tray chassis. The two leading wheels are pneumatic; the rear castor wheel acts as a line marker. The pump is a 12v diaphragm pump powered from its own integral battery. ( A charger is supplied with each machine.) A pressure gauge and a bypass regulator are fitted for the hand lance. The pump is run on a pressure system which means that when the spray is shut off the pump shuts down: Open, and the pump restarts. The low to ground four nozzle boom minimises drift and therefore close to edge work can be carried out. A brass trigger lance is supplied for spot spraying etc. The handles are adjustable to suit the operator. A tow bar is supplied with each machine. The average spray time per battery charge is approximately five hours, normal spray use (3.5 hours intermittent) this is for continuous spraying obviously, on/off time, refill and movement actions will enhance overall spray time.

Free Delivery

This version of the sprayer is specially designed to pass through narrow 450mm (18") seed beds.

Where the sprayer is to be used on rough, uneven ground, four large 400 x 8 wheels have been fitted.

Free Delivery

This model is fitted with a four nozzle boom giving a spray width of 915mm (36"). The nozzles are fitted to a turn over turret holder giving a choice of three types of nozzles.

Free Delivery

The PS22 is fitted with a larger pump than the PSP, flow rate is 7 Litres per minute (higher flow rate pumps can be supplied). This sprayer is fitted with a large break back boom with a spray width of 2400mm (96"); the two outer nozzles of the boom can be turned off to give a narrow spray width if required. A high capacity 22amp hour battery is fitted. The average spray time per battery charge is approx. 5 hours normal spray use, this is for continuous spraying obviously, on/off time: refill and movement actions will enhance overall spray time. The sprayer is mounted on a tricycle type configuration, making the unit easy to operate and manoeuvre. A 12v battery charger and hand trigger lance are supplied with each unit.

Free Delivery

This low cost unit is designed to replace the knapsack sprayer. The sprayer pump is powered by its own rechargable dry cell battery. The battery and charger are included with the unit. The compact sprayer is mounted on a chassis having four 200mm (8") rubber tyre wheels making it extremely stable and easy to manoeuvre. This unit is supplied as standard with; A hand held brass trigger lance - for spraying plants, trees, shrubs and spot spraying docks, nettles, etc. this can be adjusted to a wide band sprayer by changing to the fan pattern nozzle or a wide angle nozzle supplied. A three nozzle spray boom giving a spray width of 1220mm (48")

Free Delivery

deal for large areas with limited access or if the terrain is unsuitable for tractors. A constant forward speed makes spray coverage uniform accross the entire spray area. The sprayer is propelled by a four wheel chassis with two drive wheels. It has forward and reverse gears and is powered by a 3.5hp Briggs and Stratton engine. The sprayer has a four nozzle boom, spraying to a width of two meters. A trigger lance for spot spraying and three meters of heavy duty hose with on/off lever tap and quick fit coupleing for simple change over from the boom, come as standard with the sprayer. The pump is powered from a rechargeable battery.

Free Delivery

The indoor waterer is a very useful water dispenser for the maintenance of indoor plants etc. The 25 litre tank mounted on a two wheel trolley which is easily maneuvered by the handle around corridors etc. The water is dispensed by a small 12 volt pump powered from an integral rechargeable battery. A battery charger is supplied with each unit. A lightweight trigger lance puts the water where it is required. The waterer has a small container for collecting plant groomings. A manual handle makes the transporting of the unit up and down stairs and van loading an easy operation. The water tank can be removed leaving a very useful trolley to transport plant containers.

Mounting 2 cushioned wheel trolley with 2 guiding castors Dimensions Width 540mm (22"), Height 800mm (32"), Length 1450mm (57") Pump 12 volt DC electric pump, supplied with rechargeable dry cell battery and charger. Approximately 3 hours continuous watering per charge. Flow rate 12 litres per minute Hose 3.66 metres (12') heavy duty 1/2" hose complete with 'on/off' lever tap, quick fit coupling for simple lance change over. Lances a) Telescopic lance complete with rose head for basket watering up to 6 metre reach b) Short lance for tubs and beds. Two large pneumatic front wheels (400 x 8), two rear castor wheels. A parking brake incorporated in design. A rash bucket is fitted as standard.

Pump: 12 volt diaphragm pump 18 litres per minute, powered from a re-chargeable battery (charger and battery supplied) Lances: a) Telescopic lance with a removable rose head for baskets, up to 6 metre reach. b) Short lance for tubs and beds. Hose: 6 metres of heavy duty hose is supplied c/w on/off facility at the lance. Two large pneumatic front wheels 400 x 8, two rear castor wheels, a parking brake incorporated in the design. A trash bucket is fitted as standard.

Pump: 12 volt diaphragm pump 18 litres per minute, powered from a re-chargeable battery (charger and battery supplied) Lances: a) Telescopic lance with a removable rose head for baskets, up to 6 metre reach. b) Short lance for tubs and beds. Chassis: 4 wheel chassis with forward and reverse gears. 3.5 Briggs and Stratton engine.

Tank Capacity: 70L 12 Volt Pump (Diaphragm pump powered from a rechargeable battery.) 18l / min Telescopic lance with rose head and six metre reach, and hand lance for tubs and beds supplied as standard.

Mounting 4-wheel turntable trolley, parking brake, designed for either pulling or towing.

Mounting 4-wheel turntable trolley, parking brake, designed for either pulling or towing.

General: A small self-contained waterer powered by the standard 12 volt battery. The unit, incorporates a pressure system. Open the lance tap, the pump will start. Shut the tap and the pump shuts down.

Mounting Skid for mounting on rear of vehicles or trailers

Mounting Skid for mounting on rear of vehicles or trailers

Mounting Skid for mounting on rear of vehicles or trailers

Mounting Skid for mounting on rear of vehicles or trailers

The petrol towed water unit has a Steel Chassis frame, over-run brakes, lights & jockey wheel

A compact tractor of 18Hp and above will pull the harrow. They can be used for pulling thatch and dead grass from paddocks, for levelling and preparation of seed beds and will also assist in the management of horse and pony arenas.

These chain harrows, by design are easier to pull than conventional chain harrows. The major feature of these chain harrows is that they can be pulled in three different directions to suit the desired effect. The tines of the harrow protrude more if pulled in one direction creating an aggressive application. If the tow bar is changed to the other end of the chain harrow, the tines protrude less, creating a passive application. The harrow can also be turned upside down for levelling grassed areas.

This harrow is suitable for work behind tractors of 15Hp and above to remove dead vegetation from lawns, paddocks and large grassed areas. The harrow is suitable for seed bed preparation; both levelling and covering. They are extremely useful for the rejuvenation of horse arenas.

These chain harrows, by design are easier to pull than conventional chain harrows. The major feature of these chain harrows is that they can be pulled in three different directions to suit the desired effect. The tines of the harrow protude more if pulled in one direction creating an aggressive application. If the tow bar is changed to the other end of the chain harrow, the tines protrude less, creating a passive application. The harrow can also be turned upside down for levelling grassed areas.

The rubber surface arena leveller maintenance unit has been developed and manufactured by SCH to rejuvenate areas with rubber surfaces. The unit is free floating and may be towed by a 4x4, ATV or tractor. The front row of adjustable spring tines tedder through the surface alleviating compaction build-up. The two rear bars ride over the surface levelling out the rubber chips. Fitted with a removable side blade, to pull in material deposited on kicking boards.

The arena leveller maintenance unit will quickly and efficiently maintain your synthetic or sand surface menage. The proper maintenance of the surface will prolong its life. The unit is of a strong metal construction for long life. A diagonal cross arm (supplied as standard) clips onto the underside of the frame to "pull in" the build of material that works its way to the "kickboards"

When a dusty or dry manege needs to be dampened down. This could be the product you need, a dusty manege can be an uncomfortable place to ride for both people and horses. Any rider who has spent their schooling time wiping streaming eyes, coughing or being pulled out of the saddle by a sudden violent cough or sneeze from the horse, will be interested in this product.

A manege groomer, ideal for maintenance of both sand and fibre and sand and rubber surfaces. With drawbar, towed, 72" working width. Spring tines lift the sand and the two crumb rollers redistribute the material evenly, providing you with a level, even and safe surface for riding. The wheels make transportation and storage of the unit quick and easy.

A manege groomer, ideal for maintenance of both sand and fibre and sand and rubber surfaces. With drawbar, Towed, 60" working width. Spring tines lift the sand and the two crumb rollers redistribute the material evenly, providing you with a level, even and safe surface for riding. The wheels make transportation and storage of the unit quick and easy.

The scarifying rake is designed to remove dead and matted grass from pasture land, paddocks and rough grassed areas. The rake may also be used for combing through most horse maneges, freshening up large drives and gravelled areas, etc. With the transport wheels removed and turning the rake upside down it becomes a useful tool for levelling seed beds, mole hills, etc. The rake is transported in the upside down position on the two wide profile wheels supplied with each rake. 

New for Gravel Drive Maintenance The tow bar on the SR2 has been redesigned so that the rake will tow in an angled position. A side blade is fitted to pull gravel in from the side which has been pushed to the edge.

This rake has four rows of heavy duty spring coiled tines which will tease out the thatch and dead grass from paddocks and large grass areas. A weight tray on top of the unit allows ballast weight to be added to give extra penetration. Depth control wheels which also act as transport wheels are fitted as standard.

Designed to remove hay from wild flower meadows, this version of the Hay Rake comes with 19 tines as opposed to the ten tines on the original model. This machine is suitable for gathering finer cut grass. NB This is a hay rake not a a grass sweeper.

This very useful addition to the range allows water to be taken, in bulk, to areas where natural or piped water is unavailable. The standard drinking cart has a capacity of 600 litres (132 gallons). A removable water bowl complete with a float valve is fitted to the rear of the cart.

This trailer eases the transport of water to animals which are grazed in areas where water is not available. A 900 litre (200 gallon) baffled tank is mounted on a fully road going legal chassis, brakes, lights, mudguards etc. To the rear of the tank is fitted a drinking bowel complete with a float valve. The bowl is removable when travelling.

This 270 litre water carrier has been added to the range to transport a useful quantity of water. Mounted on low ground pressure wheels for use over unfriendly ground. The carrier can be pulled with a medium range ATV or compact tractor.

This small water tanker is ideal for towing behind an ATV or similar to transport water to animals in rough terrain areas, water laden bogs etc. The water may be dispensed at speed using a small 12 volt pump powered from the towing vehicle electric supply. The water can also be discharged from a 3/4in tap on the rear of the container.

Ideal for use on fine turf surfaces, cricket squares, tennis courts. bowling greens etc. Limited penetration multi toothed drums will penetrate the surface to alieviate the surface compaction. This allows air and nutrients to start their journey to the root system. When flood watering is carried out the multi holes disperse the water to the roots extremely quickly. A small roller is incorporated to iron out any small bumps. The roller also makes it easy to transport the unit from the shed to the pitch.

Spikes can be replaced when worn.