If you want to level out your lawn or just like to have those classic stripes then you need to purchase one of the rollers in this section. The weight can easily be adjusted to suit individual working conditions by adjusting the amount of water or sand ballast. Lightweight when storing empty, it will give you those professional stripes with very little effort.
This small metal roller is very useful in areas where a larger roller can not be worked. It can be used behind low horse power tractors (10hp), or by hand with the optional hand conversion kit. To gain weight the roller may be filled with water. This greatly increases its weight and therefore its rolling performance.
The large diameter roller is shaft mounted onto the frame with 25mm bearings. A scraper blade is fitted to the mounting frame to prevent a build up of earth etc. on the roller face. The roller may be water ballasted for extra weight. There are two filling/emptying points situated at each end of the roller to make the filling and emptying task a simple operation.
The 6HGR has a diameter of 18"(450mm) with a working width of 72"(1800mm). The roller is mounted on ball bearings. A mud scraper bar is fitted. The roller, for added weight, can be ballasted with water or sand.