Trailers & Carts

This SCH low cost budget trailer is ideal in situations where light to medium duties are required. The trailer has full tipping facilities. (There are no extension sides available for this trailer). The DTSB trailer runs on 400x8 pneumatic tyres with roller bearing hubs.

Part of the SCH budget range, a four wheeled turn table trolley. Ideal for smallholders, builders, equestrian establishments. The trolley runs on four 400 x4 pneumatic wheels. The design of the handle allows the trolley to be pulled by hand or towed. 300mm(12") headboards may be added as an optional extra.

Part of the SCH budget range, a four wheeled turn table trolley. Ideal for smallholders, builders, equestrian establishments. The trolley runs on four 400 x 8 pneumatic wheels. The design of the handle allows the trolley to be pulled by hand or towed. 300mm(12") headboards may be added as an optional extra.

Part of the SCH budget range, a four wheeled turn table trolley. Ideal for smallholders, builders, equestrian establishments. The trolley runs on four 400 x 8 pneumatic wheels. The design of the handle allows the trolley to be pulled by hand or towed. 300mm(12") headboards may be added as an optional extra.

The SCH two wheel balance cart can either be manually pushed or it can be towed. A tow bar replaces the support foot. In either mode the sides can be hinged down or completely removed. The wheels being mounted on board makes a useful load carrier where there are width restrictions.

The SCH trailer/barrow is styled on our popular plastic bodied trailer (PTP), with a strong moulded rot proof plastic body. The barrow handles are incorporated in the chassis, with an additional tow bar to allow the barrow to be towed when required.

Large pneumatic wheels make this trailer easy to manoeuvre over rough ground: the removeable 39 litre bin with two rope handles makes this unit an ideal transporter for numerous outdoor tasks.

With its small wheels and removeable trug this handybin is ideal for log carting, shopping etc. Remove the trug and it can be used for many awkward tasks.

The SCH NTT his a heavy duty general purpose load mover lending itself to many useful tasks around the yard. The unit runs on two pneumatic wheels (15-600 x 6) and has a large carrying platform. The frame is designed so that the weight of the load is evenly distributed.

A special feature of the SCH GDTT is it's a tipping metal bodied tipping trailer with wide profile wheels which come complete with bearings to prolong their life. The wide wheels mean that "track marks" are kept to a minimum. A manual push/pull handle is fitted to all SCH dump trailers (excluding DTSB) to make them easy to manoeuvre when used away from the tractor. The manual handle is a must for those of us who find reversing difficult or even impossible. Please note: picture shows extension sides fitted, they are available as an add on.

50mm Ball Hitch Attachment (Compatible with all This equipment)

The SCH GWTS10 is a good strongly constructed timber bodied trailer for use behind garden tractors. The tailgate is removable for the efficient discharge of material when tipped. The sides are hinged and can be completely removed if required to give a platform body with a fixed head board. The trailer is fitted with wide profile pneumatic tyre wheels complete with bearings. As an optional extra, extension sides may be fitted.

SCH Extension sides - (Ref.: GWTX10). These easily removable heavy duty 300mm (12") high extension sides as shown in the photo. Please Note: Self fitting, some tools will be needed for the fitting of the extension sides.

The SCH four wheel trailer (GWT415) is a heavy duty turn table trailer. The trailer can be pulled by the standard clevis hitch provided, or a ball hitch attachment can be fitted as an optional extra. The trailer also has, as a standard fitting, a hand pull handle which simply pins into the clevis hitch. These two pulling positions make the trailer a very useful dual purpose unit. The 300mm (12in) sides and tail board are hinged and can be let down as required or removed completely to give a platform trolley. The wheels being mounted under the chassis allows the sides to be dropped down unhindered. The head board is fixed. The optional extension sides double the cubic cargo space for carrying bulky materials

SCH Extension sides (Ref.:GWTX415) Four easily removable heavy duty 450mm (18") high extension sides Please Note: Self fitting, some tools will be needed for the fitting of the extension sides.

The SCH HTRL(1) is a single acting ram hydraulic tipping trailer has been designed for use behind compact tractors. The headboard is fixed, the two sides and tailgate drop down. the trailer is clad with exterior faced 18mm plywood. the trailer has a carrying capacity of 1 ton. A clevis hitch is supplied as standard. Powered from the tractors hydraulic system.

SCH Mesh extension sides. Height: 450mm (18") Ref:. HTRLX for use on hydraulic tipping trailers. Please Note: Self fitting, some tools will be needed for the fitting of the extension sides.

The SCH HTRL(2) is a double acting ram hydraulic tipping trailer has been designed for use behind compact tractors. The headboard is fixed, the two sides and tailgate drop down. the trailer is clad with exterior faced 18mm plywood. the trailer has a carrying capacity of 1 ton. A clevis hitch is supplied as standard. Powered from the tractors hydraulic system.

The SCH HTRL(M) is a hydraulic tipping trailer which has been designed for use behind compact tractors. The headboard is fixed, the two sides and tailgate drop down. the trailer is clad with exterior faced 18mm plywood. the trailer has a carrying capacity of 1 ton. A clevis hitch is supplied as standard.

The SCH HTRL(E) is a hydraulic tipping trailer which has been designed for use behind compact tractors. The headboard is fixed, the two sides and tailgate drop down. the trailer is clad with exterior faced 18mm plywood. the trailer has a carrying capacity of 1 ton. A clevis hitch is supplied as standard. 12 volt hydraulic power pack.

The SCH GWTS15 is a two wheeled, timber bodied tipping trailer with 760kg (15cwt) carrying capacity. The tailgate and sides are easily removed to give a generous sized platform truck with a fixed headboard. The wide profile bearing wheels have a surface contact area of 200mm (8") making the trailer extremely stable under load. The wide wheels minimise track marks. Extension sides may be fitted.

SCH Extension sides (ref: GWTX15) Four easily removable heavy duty 450mm (18") high extension sides. Please Note: Self fitting, some tools will be needed for the fitting of the extension sides.

SCH 18 inch Mesh extension sides for the GATV trailer.

SCH 36 inch Mesh extension sides for GATV Trailer.

SCH Loading ramp for GATV Trailer

The SCH THT timber hauler is an ideal tool to haul around wood etc, from wooded areas. The hauler can be used behind an ATV, tractor or a 4x4. The four flotation wheels with their wide profiles mean that the hauler can be used on soft ground. The guards over the wheels prevent brush wood from getting tangled in the wheels. If required a board can be placed on top of the chassis to convert it to a flat bed cargo carrying trailer. A 50mm ball hitch, and a jack leg are fitted as standard.

The SCH bin trailer is used on many sites where waste bins have to be collected and transported to a central disposal point. Caravan parks, zoos, and public areas are among the many users. Bin trailers are manufactured to the customers own requirements. The trailer illustrated was constructed for a marina and is being towed by a fork lift truck. Galvanised finish can be supplied in lieu of our standard paint finish. NB The trailer illustrated is for off road or slow tow use only.

The new SCH WBTM easy to use attachment has been added to the range to make transportation of wheelie bins easier and quicker. Hitch the two wheeled trailer to the rear of a garden tractor, sit on mower or quad and use the two independent grips to securely lift each bin by its handles and tip so that the bins are lifted off the ground. You can then drive the trailer and bins to any areas you want. This trailer is ideal for establishments with a very long drive, where the bins need to be at the roadside for weekly collection or brown bins need to move around the garden. TheWBTM is also very useful for organisations and business where there may be multiple bins on site that require transporting to one collection point. For example, camping and caravanning sites, schools and universities. The trailer is also perfect for using at public events, festivals etc. THIS TRAILER IS NOT SUITABLE FOR HIGH SPEED USE.

Box Van TAV07064MY Telephone to Book 01159 200099
6'4"x 4'10"x 4'9"

Price Includes VAT

Long Term Hire Prices on Request

Gross Vehicle Weight: 750Kgs
Unladen weight: 240Kgs
Carrying capacity: 510Kgs
Internal body dimensions: 1.85 x 1.25 x 1.22m (LxWxH)

What You Need To Hire A Trailer
Drivers Licence
NB. World of Mowers are referring to your drivers licence for identification purposes only. It is the Hirers responsibility to ensure they comply as follows:

Trailers below 750kg gross (This usually means an unbraked trailer, but the trailer is still limited to half the kerbweight of the towing vehicle when loaded) can be towed legally on a B licence only.

Indespension Trailers NOT requiring an E category on the drivers licence:

Light Goods Trailers
DTU1, DTU2, DTU4
Goods Trailers
GTU1, GTU1 Extended
Van Trailers
VTU1
For all other trailers, drivers need a B + E category on their driving licence. Note: For Southern Ireland a full Irish driving licence is required, but it must be used in conjunction with a local address. Photographic identity must be provided, either a photograph driving licence or passport.

Car Transporters Telephone to Book 01159 200099
CT27147 14'0 x 7'0

Price includes VAT
Gross Vehicle Weight: 2700kg-2700kg
Unladen Weight: 690kg-672kg
Carrying Capacity: 2010kg-2028kg
Internal body dimensions (LxW): 4.90m x 1.94----4.30m x 1.94
Bed height; 410mm
What You Need To Hire A Trailer
Drivers Licence
NB. World of Mowers are referring to your drivers licence for identification purposes only. It is the Hirers responsibility to ensure they comply as follows:

Trailers below 750kg gross (This usually means an unbraked trailer, but the trailer is still limited to half the kerbweight of the towing vehicle when loaded) can be towed legally on a B licence only.

Indespension Trailers NOT requiring an E category on the drivers licence:

Light Goods Trailers
DTU1, DTU2, DTU4
Goods Trailers
GTU1, GTU1 Extended
Van Trailers
VTU1
For all other trailers, drivers need a B + E category on their driving licence. Note: For Southern Ireland a full Irish driving licence is required, but it must be used in conjunction with a local address. Photographic identity must be provided, either a photograph driving licence or passport.

Indespension Unbraked Goods Trailer with Ramp Tailgate for Hire 8 x 5 ft Model SE07085R

Price Includes VAT
Gross Vehicle Weight: 750Kg
Unladen Weight: 220Kgs
Carrying Capacity: 530Kgs
Internal body dimensions 2.45 x 1.5 x 0.3m (LxWxH)
What You Need To Hire A Trailer
Drivers Licence
NB. World of Mowers are referring to your driver's licence for identification purposes only. It is the Hirers responsibility to ensure they comply as follows:

Trailers below 750kg gross (This usually means an unbraked trailer, but the trailer is still limited to half the kerb weight of the towing vehicle when loaded) can be towed legally on a B licence only.

Indespension Trailers NOT requiring an E category on the driver's licence:

Light Goods Trailers
DTU1, DTU2, DTU4
Goods Trailers
GTU1, GTU1 Extended
Van Trailers
VTU1
For all other trailers, drivers need a B + E category on their driving licence. Note: For Southern Ireland, a full Irish driving licence is required, but it must be used in conjunction with a local address. Photographic identity must be provided, either a photograph driving licence or passport.

Leisure Use Jockey Wheel With A Telescopic Retraction System. 

• 750kg Max Capacity. 
• 30kg Max Nose Load. 
• Solid Rubber Wheel.
• Smooth Shaft
• Complete With PJ035 Clamp
• Zinc Plated Construction.

Shaft Diameter: 34mm
Closed Height: 530mm
Wheel Diameter: 170mm
Tyre Width: 43mm

The SE07064 is an unbraked 6'6" x 4' trailer with a single axle indespension SuperRide suspension, with A-frame construction and constructed with profiled galvanised pressed steel sides and a G.V.W. of 750Kgs. Inset rear light clusters for better protection, wide plastic mudguards, the floor is made of a heavy duty phenolic none slip material and the rear ramp is fully covered with chequer plate. To help moving the trailer around when not mounted on a vehicle it is fitted with a adjustable jockey wheel. This trailer is ECWVTA Type Approved.

Price includes Trailer with ladder rack, two prop stands, Spare wheel including carrier, Triplelock high security Coupling

The SE07084 is an unbraked 8' x 4' single axled trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 750Kgs.

Price includes Trailer with Ladder Rack, Two Prop Stands, Spare Wheel including Carrier, Triplelock high sercurity Coupling.

Leisure Use Jockey Wheel With Telescopic Retraction System.

• 750kg Max. Capacity.
• 30kg Max. Nose Load.
• Pneumatic Rubber Wheel.
• Smooth Shaft
• Complete With Clamp
• Zinc Plated Construction

Shaft Diameter: 48mm
Closed Height: 620mm
Wheel Diameter: 260mm
Tyre Width: 82mm

Never Have A Flat Tyre Again With This Cushion Tyre Jockey Wheel.
Perfect For Leisure Use Such As Camping & Marine Applications
 

• 750Kg Max. Capacity
• 30kg Max. Nose Load. 
• Solid, Rubber Cushion Tyre On A Nylon Wheel.
• Smooth Shaft
• Zinc Plated Construction
• Telescopic

Shaft Diameter: 48mm
Closed Height: 560mm
Wheel Diameter: 260mm
Tyre Width: 70mm

The SE07064R is an unbraked 6'6" x 4' single axled trailer, constructed with profiled galvanised pressed steel sides and a includes ramptail as standard.

Price includes Trailer with Ladder Rack, Two Prop Stands, Mesh Kits for Ramptail, Spare wheel including Carrier, Triplelock high sercurity Coupling.

The Indespension SE07085R is an unbraked 8' x 5' single axle trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 750Kgs.

Price includes Trailer with Ladder Rack, Two Prop Stands, Mesh kits for Ramptail, Spare Wheel including Carrier, Triplelock high sercurity Coupling.

Leisure use Jockey Wheel with telescopic retraction system.

• 1000KG Max Capacity.
• 70KG Max Nose Load.
• Solid Rubber Wheel. 
• Smooth Shaft
• Zinc Plated Construction.
• Clamp Not Included.

Shaft Diameter: 42mm
Closed Height: 540mm
Wheel Diameter: 200mm
Tyre Width: 47mm

Industrial Use Jockey Wheel With Telescopic Retraction System.

• 34mm Shaft Diameter.
• 1000kg Max Capacity.
• 50kg Max Nose Load.
• Solid Rubber Wheel.
• Smooth Shaft
• Zinc Plated Construction.
• Clamp Not Included

The Indespension SE07085R is an unbraked 8' x 5' single axle trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 750Kgs.

Price includes Trailer with Ladder Rack, Two Prop Stands, Mesh kits for Ramptail, Spare Wheel including Carrier, Triplelock high sercurity Coupling.

Leisure Use Jockey Wheel With Telescopic Retraction System.  

• 1500kg Max. capacity. 
• 70kg Max. Nose Load.
• Solid Rubber Wheel.
• Smooth Shaft
• Zinc Plated Construction.
• Clamp Not Included.

Shaft Diameter: 48mm
Closed Height: 550mm
Wheel Diameter: 200mm
Tyre Width: 47mm

The GT13064 is a braked 6' x 4' single axle trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 1300Kgs.

Price includes Trailer with Standard features plus Ladder Rack, Two Prop Stands.

The GT13084 is a braked 8' x 4' single axle trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 1300Kgs.

Price includes Trailer with all standard features plus ladder rack, two prop stands, Mesh Kits for Ramptail, Ramptail.

Industrial Use Jockey Wheel With Nose Load Indicator.

• 3000kg Max. Capacity
• 150kg Max. Nose Load
• Solid Rubber Wheel
• Smooth Shaft
• Zinc Plated Construction
• Clamp Not Included

Shaft Diameter: 48mm
Wheel Diameter: 210mm
Tyre Width: 60mm

Industrial Use Jockey Wheel With Telescopic Retraction System.

• 3000kg Max. Capacity.
• 100kg Max. Nose Load.
• Solid Rubber Wheel.
• Smooth Shaft
• Zinc Plated Construction.
• Clamp Not Included.

Shaft Diameter: 42mm
Closed Height: 560mm
Wheel Diameter: 175mm
Tyre Width: 45mm

The GT26084 is a braked 8' x 4' twin axle trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 2700Kgs.

Price includes Trailer with all standard features plus Ladder Rack, Two Prop Stands, Mesh kits for Ramptail, Ramptail.

The GT26085 is a braked 8' x 5' twin axle trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 2700Kgs.

Price includes Trailer with all standard features plus Ladder rack, two prop stands, Meshkits for Ramptail, Ramptail.

Industrial Strength Jockey Wheel With Telescopic Retraction System. 
Comes Complete With Foot Brake
Perfect For Unbraked Trailer Application.
 

• 42mm Shaft Diameter. 
• 3000kg Max Capacity.
• 100kg Max Nose Load
• Solid Rubber Wheel.
• Smooth Shaft
• Zinc Plated Construction. 
• Clamp Not Included.

Industrial Use Bradley Jockey Wheel With Telescopic Retraction System.

• 3000kg Max. Capacity.
• 100kg Max. Nose Load.
• Solid Rubber Wheel.
• Smooth Shaft
• Zinc Plated Construction.
• Clamp Not Included.

Shaft Diameter: 42mm
Closed Height: 560mm
Wheel Diameter: 175mm
Tyre Width: 45mm

The GT26105 is a braked 10' x 5' twin axle trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 2700Kgs.

Price includes Trailer with all Standard Features Plus Ladder Rack, Two Prop Stands, Mesh Kits for Ramptail, Ramptail.

The GT26106 is a braked 10' x 6' twin axle trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 2700Kgs.

Price includes Trailer with all Standard Features Plus Two Prop Stands, Mesh Kits for Ramptail, EXtende Ramptail.

3500KG Jockey Wheel with retracting wheel.

Max Nose Load: 250KG

Shaft Diameter: 60mm

Shaft Type: Smooth

Wheel Diameter: 195mm

Wheel Width: 60mm

Industrial Use Jockey Wheel With Telescopic Retraction System.

• 48mm Shaft Diameter. 
• 3500KG Max Capacity.
• 100KG Max Nose Load.
• Solid Rubber Wheel.
• Spring Loaded Safety Bolt.
• Zinc Plated Construction.
• Clamp Not Included.

Shaft Diameter: 48mm
Closed Height: 680mm
Wheel Diameter: 200mm
Tyre Width: 56mm

The GT26126 is a braked 12' x 6' twin axle trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 2700Kgs.

Price includes Trailer with all Standard Features Plus Two Prop Stands, Mesh Kits for Ramptail, Extended Ramptail.

The CT27147 is a car transporter trailer with a 2028kg carrying capacity and a 14' x 6'.4 trailer deck.

Price includes Trailer with all Standard Features plus a Manual Winch, Post & Strap.

Industrial Use Knott Jockey Wheel With Telescopic Retraction System. 

• 48mm Shaft Diameter. 
• 3500KG Max. Capacity.
• 350KG Max. Nose Load.
• Solid Rubber Wheel.
• Shaft Locking Pin To Stop Wheel Spinning During Transport.
• Zinc Plated Construction.
• Clamp Not Included.

Industrial Use Anti-Vibration Jockey Wheel With Telescopic Retraction System. 

• 3500KG Max Capacity.
• 350KG Max Nose Load.
• Solid Rubber Wheel.
• Spring Loaded Safety Bolt.
• Zinc Plated Construction.
• Clamp Not Included.

Shaft Diameter: 48mm
Closed Height: 590mm
Wheel Diameter: 225mm
Tyre Width: 56mm

The CT27167 is a car transporter trailer with a 2010kg carrying capacity and a 16' x 6.4'' trailer deck.

Price includes Car Transporter with all the Standard Features Plus a Manual Winch, Post & Strap.

The TD35166 is a wheels under, twin axle, tilting deck car transporter with a carrying capacity of 2725Kgs and a bed size of 16' x 6'8".

Price includes the Trailer with all the Standard Features Plus a Manual Winch, Post & Strap.

Industrial Anti-Vibration Jockey Wheel With Telescopic Retraction System. 

• 48mm Shaft Diameter.
• 3500KG Max. Capacity.
• 350KG Max. Nose Load.
• Shaft Locking Pin To Stop Unwinding During Transportation.
• Solid Rubber Wheel
• Ribbed Shaft
• Zinc Plated Construction
• Clamp Not Included

The TD35187T is a wheels under, tilting deck car transporter with a carrying capacity of 2527Kgs and a bed size of 18' x 7'.

Price includes Trailer with all the Standard Features Plus Manual Winch, Post & Strap.

The TD35167T is a wheels under, tilting deck car transporter with a carrying capacity of 2593Kgs and a bed size of 16' x 7'.

Price includes Trailer with all the Standard Features Plus Manual Winch, Post & Strap.

Want a Jockey Wheel that lasts and lasts? 
The JW070U has been specially developed for legendary reliabilty and long term use.

This Industrial strength, Anti-Vibration Jockey Wheel has the following features:

• 48mm Anti-Vibration Shaft Diameter.
• Smooth Winding Action
• Heavy Duty Bearing With Flush Mounted Greasing Point
• 6mm Steel Wall Thickness (Inner & Outer)
• Machined Billet Steel Fork
• Heavy Duty Castor Wheel 200x50mm Diameter
• Needle Bearings With Grease Nipple
• Polyurethane Tyre for Smooth Running

(Clamp Not Included)

Additional benefits include:

Fits standard 48mm clamp - no need to purchase expensive 63mm clamp

This jockey wheel is perfect for heavy trailer applications such as catering and exhibition units. It won't bend, leaving you unable to move the trailer.

The TD35167 is a wheels under, twin axle, tilting deck car transporter with a carrying capacity of 2705Kgs and a bed size of 16' x 7'.

Price includes Trailer with all the Standard Features Plus a Manual Winch, Post & Strap.

The Indespension Box Vans Utilise light weight materials and are constructed with modern adhesive technology, the TAV 1 is an unbraked 6' x 4' x 4' (LxWxH) single axle box van trailer.

Price includes the Box van with all the Standard Features Plus Spare Wheel including Carrier, Ply lining Kit, Jockey Wheel.

Industrial use, anti-vibration jockey wheel with telescopic retraction system.

• 63mm Shaft Diameter
• 3500kg Max Capacity
• 750kg Max Nose Load
• Castor Style Nylon Wheel
• Locking Pin To Stop Shaft Unwinding During Transport
• Zinc Plated Construction
• Clamp Not Included

The TD35166T is a wheels under, tilting deck car transporter with a carrying capacity of 2611Kgs and a bed size of 16' x 6'8".

Price includes Trailer with all the Standard Features Plus Manual Winch, Post & Strap.

Discover the latest development in car transportation, brimming with unique features as the result of years of design advancements.

Smooth shaft steel clamp for jockey wheel and prop stand with 34mm grip diameter.

Utilising light weight materials and constructed with modern adhesive technology, the TAV 3 is a braked 8' x 4' x 5' (LxWxH) single axle box van trailer.

Price includes Box Van with all Standard Features Plus Spare Wheel including Carrier, Ramp Tail, Ply Lining Kit, Personnel Door.

Utilising light weight materials and constructed with modern adhesive technology, the TAV 4 is a braked 8' x 5' x 5' (LxWxH) twin axle box van trailer.

Price includes Trailer with all the standard features Plus Spare Wheel including Carrier, Ply Lining Kit, Two Prop Stands.

Smooth shaft steel clamp for jockey wheel and prop stand with 42mm grip diameter.

Smooth shaft steel clamp for jockey wheel and prop stand with 48mm grip diameter.

Utilising light weight materials and constructed with modern adhesive technology, the TAV 4 HIGH is a braked 8' x 5' x 6'1" (LxWxH) twin axle box van trailer.

Price includes Trailer with all Standard Features Plus Spare Wheel including Carrier, Ply Lining Kit, Two Prop Satnds.

10' x 5'6" Flatbed Trailer Manufactured By Indespension.

Price includes Trailer with Standard Features Plus Ladder Rack, Fitted Spare Wheel, Dropsides including Headboards.

Superior quality smooth tube jockey wheel and prop stand clamp to suit 23mm grip diameter.

Smooth tube cast clamp to suit jockey wheel and prop stand 34mm grip diameter.

10' x 6'6" Flatbed Trailer Manufactured By Indespension

Price includes Trailer with all the Standard Features Plus Ladder Rack, Fitted Spare Wheel, Flatbed Headboard.

12' x 6'6" Flatbed Trailer Manufactured By Indespension.

Price includes Trailer with all the Standard Features Plus Fitted Spare Wheel.

Smooth tube cast clamp to suit jockey wheel and prop stand 42m grip diameter.

Anti-vibration jockey wheel and prop stand clamp to suit 48mm grip diameter.

14' x 6'6" Flatbed Trailer Manufactured By Indespension.

Price includes Trailer with all the Standard Features Plus Ladder Rack, Fitted Spare Wheel, Flatbed Headboard.

An FTL35166 is a 16'x6'6 Twin Axle flatbed trailer.

Price Includes Trailer with Standard Features Plus, Fitted Spare Wheel, Flatbed Headboard.

Anti-vibration jockey wheel and prop stand clamp to suit 48mm grip diameter.

Anti-vibration jockey wheel or prop stand clamp to suit 48mm grip diameter.

14' x 6'6" Tri-Axle Flatbed Trailer Manufactured By Indespension.

Price includes Trailer with Standard Features Plus Ladder Rack, Fitted Spare Wheel, Headboard Only.

16' x 6'6" Tri-Axle Flatbed Trailer Manufactured By Indespension.

Price includes Trailer with all the Standard Features Plus Ladder Rack, Fitted Spare Wheel, Head Board Only.

A Red Rubber Surface Mounted Rear Fog Light

A Red Swivel Fitting Plastic Fog Light 

The LT07584 is an unbraked 8' x 4' single axle trailer with wheels outside and a G.V.W. of 750Kgs. Please ring 01159200099 for Prices and Specifcations.

Aluminium Treadplate Floor-------Extra

Prop Stands---------------------------Extra

Cross Division------------------------Extra

Fold Down Front---------------------Extra

Stock Ramp Door-------------------Extra

The LT14084 is a braked 8' x 4' trailer with wheels outside and a G.V.W. of 1400Kgs. Please ring 01159200099 for prices and specifications.

A Red Plastic Surface Mounted Fog Light

Dimensions:-

Length= 80mm
Width= 51mm
Height= 71mm

The LV35126 is a braked 12' x 6' twin axle trailer with wheels outside and a G.V.W. of 3500Kgs.

EARPOINT LIGHT CNTR GREEN 020116/8/9

EARPOINT LIGHT CNR YELLOW 020117/8/9

The 14' x 6' Livestock Trailer has a triple axle and a G.V.W. of 3,500KG. For Prices and Specifications ring 01159200099.

The LV35126 is a braked 12' x 6' twin axle trailer with wheels outside and a GVW of 3500KG.

White Plastic Rectangular Front Marker

White Front Marker Light Complete With Rubber Mount & Short Piece Of Cable. 

Dimensions:- 

• Height= 84mm
• Diameter= 71mm

The LT35146T is a braked 14' x 6' triple axle trailer with wheels outside and a GVW of 3500KG.

Indespension 8' x 5' Twin Axle Rear Tipper with a carrying capacity of 2046KG.

White Plastic Front Marker Complete With Rubber Bracket

White Rubber Circular Front Marker

The TP35126E is a braked 12' x 6' twin axle trailer with inboard wheels, sides, electric tipping action and a G.V.W. of 3500kgs.

Indespension's low loader plant trailers are constructed on a monocoque chassis for lower deck height and greater towing stability this 8'x4' trailer uses 13” wheels.

Price includes Trailer with Standard Features Plus Spare Wheel including Carrier, Two Extra Deck rings, Spring assisted Ramp.

White Front Marker Light Complete With Extended Rubber Mount & Short Piece Of Cable. 

Dimensions:- 

• Height= 93.5mm
• Diameter= 75.5mm

White Plastic Front Marker Light

Dimensions:- 

• Width= 108mm
• Height= 65mm
• Diameter= 42mm

Indespension's low loader plant trailers are constructed on a monocoque chassis for lower deck height and greater towing stability this 9'x4' trailer uses 13” wheels.

Price includes Trailer with all the Standard Features Plus Spare Wheel including carrier, Two Extra Deck Rings, Spring Assisted Ramp.

Indespension's low loader plant trailers are constructed on a monocoque chassis for lower deck height and greater towing stability this 9'x5' trailer uses 13” wheels.

Price includes Trailer with all the Standard Features Plus Spare Wheel including carrier, Two Extra Deck Rings, Spring Assisted Ramp.

Surface Mounted, Plastic Clear Number Plate Light. 

Dimensions:-

• Width= 68mm 
• Height= 38mm 
• Depth= 38mm

Surface Mountable Plastic Number Plate Light. 

Dimensions:-

• Length= 87mm
• Width= 43mm
• Height= 43mm

The AD2000 is an 8' x 4' twin axle trailer constructed in sturdy chequer plate steel with a G.V.W of 2700kg.

Price includes Trailer with all the Standard Features Plus Spare Wheel including Carrier, Spring Assisted Ramp.

The Low Loader range is a brand new design of Plant Trailer. Constructed on a monocoque chassis for lower deck height and greater towing stability this 10'x6' trailer uses 13” wheels.

Price includes Trailer with all Standard Features Plus Spare Wheel including Carrier, Two Extra Deck Rings, Spring Assisted Ramp.

Surface Mounted, Plastic Number Plate Light Complete With Lead. 

Dimensions:-

• Width= 68mm
• Height= 38mm
• Depth= 38mm

Surface Mountable Plastic Number Plate Light. 

Dimensions:-

• Length= 106mm
• Width= 57mm
• Height= 57mm

The AD2800 is a 10' x 5'11" twin axle trailer constructed in sturdy chequer plate steel with a G.V.W of 3500kg.

Price includes Trailer with all Standard Features Plus Spare Wheel including Carrier, Two Extra Deck Rings, Spring Assisted Ramp

The Low Loader range is a brand new design of Plant Trailer. Constructed on a monocoque chassis for lower deck height and greater towing stability this 12'x6' trailer uses 13” wheels.

Price includes Trailer with Standard Features Plus Spare Wheel including carrier, Two Extra Deck rings, Spring assisted Ramp.

A Clear Surface Mounted Rubber Number Plate Light Complete With Lead.

Surface Mountable Plastic Number Plate Light. 

Dimensions:-

• Length= 114mm
• Width= 57mm
• Height= 67mm

This is a Low Loader Plant Trailer. Constructed on a monocoque chassis for lower deck height and greater towing stability this 8'x4' trailer uses 13” wheels. Includes Spring Assisted Ramp.

Price includes Trailer with all the Standard Features Plus Spare Wheel including Carrier, Two Extra Deck Rings.

The 10' x 5.6' ALUMAX lightweight plant trailer weighs just 580KG and can carry up to 2920KG.

Surface Mounted, Rubber Number Plate Light. 

Dimensions:-

• Width= 76mm 
• Height= 54mm 
• Depth= 66mm

Red/White Surface Mounted Plastic Side Marker Light As Used On Most Indespension Trailers. 

Dimensions:-

• Width= 40mm 
• Height= 90mm 
• Depth= 42mm

The Digadoc Ultra is specifically designed for the safe transportation of mini excavators, with a fully adjustable cowl system to fit all models. 

For Prices please ring 01159200099

The Digadoc Ultra 3.5 is specifically designed for the safe transportation of mini excavators, with a fully adjustable cowl system to fit all models. 

For prices Please ring 01159200099

Red/White Surface Mounted Plastic Side Marker Light Complete With Plastic Arm For Mounting

Dimensions:-

• Width= 46mm 
• Height= 116mm 
• Depth= 45mm

Red/White Marker Light Complete With 90 Degree Bend Rubber Mounting Arm And Interchangeable Lens

Dimensions:-

• Width= 190mm 
• Height= 165mm 
• Depth= 70mm

Red/White End Marker Light Complete With Rubber Mount And A Short Piece Of Cable. 

Dimensions:- 

• Length= 94mm 
• Height= 80.5mm 
• Depth= 83mm

Red/White End Marker Light Complete With Rubber Mount.

Dimensions:- 

• Length= 95mm 
• Depth= 87mm

Red/Clear Stork Mounted Rubber Outline Marker (Offside)

Red/Clear Stork Mounted Rubber Outline Marker (Nearside)

Red, Clear & Amber Rubber Surface Mounted Outline Marker (Nearside)

Horizontal 'Plug In' Style Nearside Rear Light Cluster. 

Includes:-

• Stop
• Tail
• Indicator
• Number Plate Light
• Reflective Triangle.

Dimensions:-

• Width=218mm
• Height= 140mm 
• Depth= 60mm

A Pair Of Rounded Horizontal 'Plug In' Style Nearside And Offside Rear Light Cluster. 

Includes:- 

• EEC Specification
• Stop
• Tail
• Indicator
• Fog
• Reflective Triangle.

Dimensions:- 

• Width=218mm
• Height= 140mm 
• Depth= 60mm

This Is A Pair Of Nearside & Offside Rounded Horizontal 'Plug In' Style Rear Light Cluster. 

The 5 Functions Include:-

• Stop
• Tail
• Indicator
• Fog
• Reflective Triangle

Dimensions:-

• Width= 218mm
• Height= 140mm 
• Depth= 60mm

Horizontal 'Plug In' Style Offside Rear Light Cluster. 

Includes:-

• Stop
• Tail
• Indicator
• Number Plate Light
• Reflective Triangle
• Fog

Dimensions:-

• Width=218mm
• Height= 140mm 
• Depth= 60mm

Vertical 'Plug In' Style Offside Rear Light Cluster. 

Includes:-

• Plastic
• Stop
• Tail
• Indicator
• Reflective Triangle
• Fog

Dimensions:-

• Width= 160mm
• Height= 218mm 
• Depth= 60mm

Vertical 'Plug In' Style Nearside Rear Light Cluster. 

Includes:-

• Stop
• Tail
• Indicator
• Reflective Triangle
• Fog

Dimensions:-

• Width= 160mm
• Height= 218mm 
• Depth= 60mm

Triangular Rounded Vertical 'Plug In' Style, Nearside Rear Light Cluster. 

Includes:- 

• UK Specification
• Stop
• Tail
• Indicator
• Reverse
• Reflective Triangle.

Dimensions:- 

• Width=230mm
• Height= 180mm 
• Depth= 60mm

Triangular Rounded Vertical 'Plug In' Style, Offside Rear Light Cluster. 

Includes:- 

• UK Specification
• Stop
• Tail
• Indicator
• Fog
• Reflective Triangle.

Dimensions:- 

• Width=230mm
• Height= 180mm 
• Depth= 60mm

Rectangular Rounded Vertical 'Plug In' Style, Offside Rear Light Cluster. 

Includes:- 

• Stop
• Tail
• Indicator
• Fog
• Reflective Triangle.

Dimensions:- 

• Width=218mm
• Height= 140mm 
• Depth= 60mm

Rectangular Rounded Vertical 'Plug In' Style, Nearside Rear Light Cluster. 

Includes:-

• Stop
• Tail
• Indicator
• Fog
• Reflective Triangle.

Dimensions:- 

• Width=218mm
• Height= 140mm 
• Depth= 60mm

Square plastic rear light cluster. Suitable for left- and right-hand positions.

Includes:-

• Stop
• Tail
• Indicator Lights
• Number Plate Light

Dimensions:-

• Width= 98mm
• Height= 102mm
• Depth= 50mm

Plastic Nearide Combination Lights

Includes:-

• Stop
• Tail
• Indicator
• Triangle
• Reverse
• Fog
• Number Plate Lights

Plastic Offside Combination Lights

Includes:-

• Stop
• Tail
• Indicator
• Triangle
• Reverse
• Fog
• Number Plate Lights

Plastic Rectangular Left & Right Hand Rear Light Cluster

Includes:- 

• Stop
• Tail
• Indicator Lights

Dimensions:- 

• Width= 116mm 
• Height= 50mm 
• Depth= 50mm

Plastic Rectangular Left & Right Hand Rear Light Cluster

Includes:- 

• Stop
• Tail
• Indicator Lights
• Number Plate Light

Dimensions:- 

• Width= 160mm 
• Height= 80mm 
• Depth= 56mm

Square Plastic Left & Right Hand Rear Light Cluster

Includes:- 

• Stop
• Tail
• Indicator Lights
• Number Plate Light

Dimensions:- 

• Width= 105mm 
• Height= 97mm 
• Depth= 52mm