Trailers & Carts

This SCH low cost budget trailer is ideal in situations where light to medium duties are required. The trailer has full tipping facilities. (There are no extension sides available for this trailer). The DTSB trailer runs on 400x8 pneumatic tyres with roller bearing hubs.

Free Delivery

Part of the SCH budget range, a four wheeled turn table trolley. Ideal for smallholders, builders, equestrian establishments. The trolley runs on four 400 x4 pneumatic wheels. The design of the handle allows the trolley to be pulled by hand or towed. 300mm(12") headboards may be added as an optional extra.

Free Delivery

Part of the SCH budget range, a four wheeled turn table trolley. Ideal for smallholders, builders, equestrian establishments. The trolley runs on four 400 x 8 pneumatic wheels. The design of the handle allows the trolley to be pulled by hand or towed. 300mm(12") headboards may be added as an optional extra.

Free Delivery

Part of the SCH budget range, a four wheeled turn table trolley. Ideal for smallholders, builders, equestrian establishments. The trolley runs on four 400 x 8 pneumatic wheels. The design of the handle allows the trolley to be pulled by hand or towed. 300mm(12") headboards may be added as an optional extra.

Free Delivery

The SCH two wheel balance cart can either be manually pushed or it can be towed. A tow bar replaces the support foot. In either mode the sides can be hinged down or completely removed. The wheels being mounted on board makes a useful load carrier where there are width restrictions.

Free Delivery

The SCH trailer/barrow is styled on our popular plastic bodied trailer (PTP), with a strong moulded rot proof plastic body. The barrow handles are incorporated in the chassis, with an additional tow bar to allow the barrow to be towed when required.

Free Delivery

The SCH PTP's body being moulded from a strong commercial grade plastic means the body will stand the carting of corrosive material (animal waste etc) without causing body rot. The trailer has a simple tipping mechanism for easy emptying. The two wide profile roller bearing pneumatic wheels help to reduce wheel marks on soft surfaces. A manual handle is fitted as standard to assist in manoeuvering the trailer when used away from the towing vehicle

Large pneumatic wheels make this trailer easy to manoeuvre over rough ground: the removeable 39 litre bin with two rope handles makes this unit an ideal transporter for numerous outdoor tasks.

Free Delivery

With its small wheels and removeable trug this handybin is ideal for log carting, shopping etc. Remove the trug and it can be used for many awkward tasks.

Free Delivery

The SCH NTT his a heavy duty general purpose load mover lending itself to many useful tasks around the yard. The unit runs on two pneumatic wheels (15-600 x 6) and has a large carrying platform. The frame is designed so that the weight of the load is evenly distributed.

Free Delivery

A special feature of the SCH GDTT is it's a tipping metal bodied tipping trailer with wide profile wheels which come complete with bearings to prolong their life. The wide wheels mean that "track marks" are kept to a minimum. A manual push/pull handle is fitted to all SCH dump trailers (excluding DTSB) to make them easy to manoeuvre when used away from the tractor. The manual handle is a must for those of us who find reversing difficult or even impossible. Please note: picture shows extension sides fitted, they are available as an add on.

Free Delivery

SCH Extension sides - Ref.:GDTX For use with with GDTT Tipping dump trailer with wide profile wheels, and GDTT/GALV, galvanised version. 300mm (12") bolt on heavy duty mesh sides Photo shows sides fitted to GDTT.

50mm Ball Hitch Attachment (Compatible with all This equipment)

Free Delivery

A special feature of this SCH GDTT/GALV Galvanised tipping trailer is its wide profile wheels which come complete with bearings to prolong their life. The wide wheels mean that "track marks" are kept to a minimum. A manual push/pull handle is fitted to all SCH dump trailers (Excluding the DTSB) to make them easy to manoeuvre when used away from the tractor. The manual handle is a must for those of us who find reversing difficult or even impossible. Optional 12" extension sides available.

This SCH GT/GALV large capacity 500kg (10cwt) metal bodied dump trailer will transport your bulky loads of leaves, grasscuttings, logs, compost etc. with ease. The tailgate is removable to make emptying when tipped a simple task.

The SCH QDT is a metal bodied tipping trailer fitted with flotation wheels and 50mm ball hitch. Based on the GDTT, the handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing. Optional 12" extension sides may be fitted to the trailer.

The SCH QDGT is a trailer fitted with flotation wheels with ball bearings and a 50mm ball hitch. The hand handle has been removed to prevent fouling the rear of the ATV and the tow bar has been extended to enable easier reversing

The large plastic trailer fills a gap in our comprehensive trailer range, where a bulk, rot proof, transporter is required. The wide profile wheels, on four stud roller bearing hubs, fitted as standard, gives the trailer stability over rough or wet ground. The chassis is built of strong steel, giving the plastic body the necessary support. A metal buffer is fitted around the top roll of the trailer. The trailer tipping device is simple to operate. An extendable tipping handle makes the tipping operation an easy task. The towing hitch is a 50mm ball coupling. Other hitches on request.

Plastic bodied tipping trailer running on wide profile wheels (20.10 x 8) mounted on ball bearing hubs. These specially mounted wide wheels are a must when operating in soft ground condition or across unfriendly terrain. The sturdy metal chassis gives superb support to the underside of the rot proof trailer body. A manual handle is fitted as standard to assist in manoeuvering the trailer when used away from the towing vehicle ( or for hand reversing for those of us who find reversing the tractor or quad impossible ). Fitted with ball hitch as standard.

The SCH GWTS10 is a good strongly constructed timber bodied trailer for use behind garden tractors. The tailgate is removable for the efficient discharge of material when tipped. The sides are hinged and can be completely removed if required to give a platform body with a fixed head board. The trailer is fitted with wide profile pneumatic tyre wheels complete with bearings. As an optional extra, extension sides may be fitted.

Free Delivery

SCH Extension sides - (Ref.: GWTX10). These easily removable heavy duty 300mm (12") high extension sides as shown in the photo. Please Note: Self fitting, some tools will be needed for the fitting of the extension sides.

Free Delivery

The SCH four wheel trailer (GWT415) is a heavy duty turn table trailer. The trailer can be pulled by the standard clevis hitch provided, or a ball hitch attachment can be fitted as an optional extra. The trailer also has, as a standard fitting, a hand pull handle which simply pins into the clevis hitch. These two pulling positions make the trailer a very useful dual purpose unit. The 300mm (12in) sides and tail board are hinged and can be let down as required or removed completely to give a platform trolley. The wheels being mounted under the chassis allows the sides to be dropped down unhindered. The head board is fixed. The optional extension sides double the cubic cargo space for carrying bulky materials

Free Delivery

SCH Extension sides (Ref.:GWTX415) Four easily removable heavy duty 450mm (18") high extension sides Please Note: Self fitting, some tools will be needed for the fitting of the extension sides.

Free Delivery

The SCH HTRL(1) is a single acting ram hydraulic tipping trailer has been designed for use behind compact tractors. The headboard is fixed, the two sides and tailgate drop down. the trailer is clad with exterior faced 18mm plywood. the trailer has a carrying capacity of 1 ton. A clevis hitch is supplied as standard. Powered from the tractors hydraulic system.

Free Delivery

SCH Mesh extension sides. Height: 450mm (18") Ref:. HTRLX for use on hydraulic tipping trailers. Please Note: Self fitting, some tools will be needed for the fitting of the extension sides.

Free Delivery

The SCH HTRL(2) is a double acting ram hydraulic tipping trailer has been designed for use behind compact tractors. The headboard is fixed, the two sides and tailgate drop down. the trailer is clad with exterior faced 18mm plywood. the trailer has a carrying capacity of 1 ton. A clevis hitch is supplied as standard. Powered from the tractors hydraulic system.

Free Delivery

The SCH HTRL(M) is a hydraulic tipping trailer which has been designed for use behind compact tractors. The headboard is fixed, the two sides and tailgate drop down. the trailer is clad with exterior faced 18mm plywood. the trailer has a carrying capacity of 1 ton. A clevis hitch is supplied as standard.

Free Delivery

The SCH HTRL(E) is a hydraulic tipping trailer which has been designed for use behind compact tractors. The headboard is fixed, the two sides and tailgate drop down. the trailer is clad with exterior faced 18mm plywood. the trailer has a carrying capacity of 1 ton. A clevis hitch is supplied as standard. 12 volt hydraulic power pack.

Free Delivery

The SCH GWTS15 is a two wheeled, timber bodied tipping trailer with 760kg (15cwt) carrying capacity. The tailgate and sides are easily removed to give a generous sized platform truck with a fixed headboard. The wide profile bearing wheels have a surface contact area of 200mm (8") making the trailer extremely stable under load. The wide wheels minimise track marks. Extension sides may be fitted.

Free Delivery

SCH Extension sides (ref: GWTX15) Four easily removable heavy duty 450mm (18") high extension sides. Please Note: Self fitting, some tools will be needed for the fitting of the extension sides.

Free Delivery

The SCH GATV trailer is designed to tow mainly behind all terrain vehicles. It can also be used with compact and large garden tractors. The tailgate is hinged. The mudguards run the whole length of the trailer to give extra carrying capacity for hay and straw bales etc.

SCH 18 inch Mesh extension sides for the GATV trailer.

Free Delivery

SCH 36 inch Mesh extension sides for GATV Trailer.

Free Delivery

SCH Loading ramp for GATV Trailer

Free Delivery

The SCH GPATV is a general purpose 'off-road' trailer for use behind quad bikes, ATV's etc. The trailer is supplied with fixed high mesh sides, ideal for carrying animals or bulky loads, straw, leaves, grass cuttings, logs etc. Wide wheels give the trailer good flotation over unfriendly ground, they also go a long way to preventing wheel lines in turf. A ramp tailgate is incorporated in the build. The floor and solid sides are of high quality phenol ply. The trailer is fitted with a 50mm ball hitch. The finish to the trailer is standard silver aluminum gloss paint.

The SCH THT timber hauler is an ideal tool to haul around wood etc, from wooded areas. The hauler can be used behind an ATV, tractor or a 4x4. The four flotation wheels with their wide profiles mean that the hauler can be used on soft ground. The guards over the wheels prevent brush wood from getting tangled in the wheels. If required a board can be placed on top of the chassis to convert it to a flat bed cargo carrying trailer. A 50mm ball hitch, and a jack leg are fitted as standard.

Free Delivery

The SCH TCT Fenn Trailer has been especially designed for use by gamekeepers and ghillies for the purpose of animal retrieval. The mesh chassis means that the trailer is both strong and light, and very easy to clean down. It's low profile low ground pressure wheels makes transport over uneven or boggy ground possible. Options available are Loading ramp, winch, galvanising. Ramp shown in second picture

The SCH bin trailer is used on many sites where waste bins have to be collected and transported to a central disposal point. Caravan parks, zoos, and public areas are among the many users. Bin trailers are manufactured to the customers own requirements. The trailer illustrated was constructed for a marina and is being towed by a fork lift truck. Galvanised finish can be supplied in lieu of our standard paint finish. NB The trailer illustrated is for off road or slow tow use only.

Free Delivery

The new SCH WBTM easy to use attachment has been added to the range to make transportation of wheelie bins easier and quicker. Hitch the two wheeled trailer to the rear of a garden tractor, sit on mower or quad and use the two independent grips to securely lift each bin by its handles and tip so that the bins are lifted off the ground. You can then drive the trailer and bins to any areas you want. This trailer is ideal for establishments with a very long drive, where the bins need to be at the roadside for weekly collection or brown bins need to move around the garden. TheWBTM is also very useful for organisations and business where there may be multiple bins on site that require transporting to one collection point. For example, camping and caravanning sites, schools and universities. The trailer is also perfect for using at public events, festivals etc. THIS TRAILER IS NOT SUITABLE FOR HIGH SPEED USE.

Free Delivery

The large waste bin mover trailer is reversed onto your large waste bin.

A retaining chain holds it in to the LWBM frame; the bin can then be towed to the required point for emptying/storage etc.

The LBWM is extremely useful where health and safety forbids the manual movement of a waste bin. The LWBM may be towed by a tractor, tug, forklift truck or a vehicle at slow speed. Draw bar heights and tow hitch type must be given at the time of order as well as the size of the bins to be moved.

Specification:

Width     :1200mm (47")

Length   : 1450mm (57")

Free Delivery

Leisure Use Jockey Wheel With A Telescopic Retraction System. 

• 750kg Max Capacity. 
• 30kg Max Nose Load. 
• Solid Rubber Wheel.
• Smooth Shaft
• Complete With PJ035 Clamp
• Zinc Plated Construction.

Shaft Diameter: 34mm
Closed Height: 530mm
Wheel Diameter: 170mm
Tyre Width: 43mm

Leisure Use Jockey Wheel With Telescopic Retraction System.

• 750kg Max. Capacity.
• 30kg Max. Nose Load.
• Pneumatic Rubber Wheel.
• Smooth Shaft
• Complete With Clamp
• Zinc Plated Construction

Shaft Diameter: 48mm
Closed Height: 620mm
Wheel Diameter: 260mm
Tyre Width: 82mm

Never Have A Flat Tyre Again With This Cushion Tyre Jockey Wheel.
Perfect For Leisure Use Such As Camping & Marine Applications
 

• 750Kg Max. Capacity
• 30kg Max. Nose Load. 
• Solid, Rubber Cushion Tyre On A Nylon Wheel.
• Smooth Shaft
• Zinc Plated Construction
• Telescopic

Shaft Diameter: 48mm
Closed Height: 560mm
Wheel Diameter: 260mm
Tyre Width: 70mm

The SE07064R is an unbraked 6'6" x 4' single axled trailer, constructed with profiled galvanised pressed steel sides and a includes ramptail as standard.

Price includes Trailer with Standard Features Plus Spare Wheel and Carrier

The Indespension SE07084R is an unbraked 8' x 4' single axle trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 750Kgs.

Price includes Trailer with standard features. Plus spare wheel and Carrier.

Leisure use Jockey Wheel with telescopic retraction system.

• 1000KG Max Capacity.
• 70KG Max Nose Load.
• Solid Rubber Wheel. 
• Smooth Shaft
• Zinc Plated Construction.
• Clamp Not Included.

Shaft Diameter: 42mm
Closed Height: 540mm
Wheel Diameter: 200mm
Tyre Width: 47mm

Industrial Use Jockey Wheel With Telescopic Retraction System.

• 34mm Shaft Diameter.
• 1000kg Max Capacity.
• 50kg Max Nose Load.
• Solid Rubber Wheel.
• Smooth Shaft
• Zinc Plated Construction.
• Clamp Not Included

Leisure Use Jockey Wheel With Telescopic Retraction System.  

• 1500kg Max. capacity. 
• 70kg Max. Nose Load.
• Solid Rubber Wheel.
• Smooth Shaft
• Zinc Plated Construction.
• Clamp Not Included.

Shaft Diameter: 48mm
Closed Height: 550mm
Wheel Diameter: 200mm
Tyre Width: 47mm

The GT13064 is a braked 6' x 4' single axle trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 1300Kgs.

Price includes Trailer with Standard features

The GT13084 is a braked 8' x 4' single axle trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 1300Kgs.

Price includes Trailer with all standard features no ramp tailgate which is available on request

Industrial Use Jockey Wheel With Nose Load Indicator.

• 3000kg Max. Capacity
• 150kg Max. Nose Load
• Solid Rubber Wheel
• Smooth Shaft
• Zinc Plated Construction
• Clamp Not Included

Shaft Diameter: 48mm
Wheel Diameter: 210mm
Tyre Width: 60mm

Industrial Use Jockey Wheel With Telescopic Retraction System.

• 3000kg Max. Capacity.
• 100kg Max. Nose Load.
• Solid Rubber Wheel.
• Smooth Shaft
• Zinc Plated Construction.
• Clamp Not Included.

Shaft Diameter: 42mm
Closed Height: 560mm
Wheel Diameter: 175mm
Tyre Width: 45mm

The GT26084 is a braked 8' x 4' twin axle trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 2700Kgs.

Price includes Trailer with all standard features

The GT26085 is a braked 8' x 5' twin axle trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 2700Kgs.

Price includes Trailer with all standard features

Industrial Strength Jockey Wheel With Telescopic Retraction System. 
Comes Complete With Foot Brake
Perfect For Unbraked Trailer Application.
 

• 42mm Shaft Diameter. 
• 3000kg Max Capacity.
• 100kg Max Nose Load
• Solid Rubber Wheel.
• Smooth Shaft
• Zinc Plated Construction. 
• Clamp Not Included.

Industrial Use Bradley Jockey Wheel With Telescopic Retraction System.

• 3000kg Max. Capacity.
• 100kg Max. Nose Load.
• Solid Rubber Wheel.
• Smooth Shaft
• Zinc Plated Construction.
• Clamp Not Included.

Shaft Diameter: 42mm
Closed Height: 560mm
Wheel Diameter: 175mm
Tyre Width: 45mm

The GT26105 is a braked 10' x 5' twin axle trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 2700Kgs.

Price includes Trailer with all Standard Features No Ramp

3500KG Jockey Wheel with retracting wheel.

Max Nose Load: 250KG

Shaft Diameter: 60mm

Shaft Type: Smooth

Wheel Diameter: 195mm

Wheel Width: 60mm

Industrial Use Jockey Wheel With Telescopic Retraction System.

• 48mm Shaft Diameter. 
• 3500KG Max Capacity.
• 100KG Max Nose Load.
• Solid Rubber Wheel.
• Spring Loaded Safety Bolt.
• Zinc Plated Construction.
• Clamp Not Included.

Shaft Diameter: 48mm
Closed Height: 680mm
Wheel Diameter: 200mm
Tyre Width: 56mm

The GT26126 is a braked 12' x 6' twin axle trailer, constructed with profiled galvanised pressed steel sides and a G.V.W. of 2700Kgs.

Price includes Trailer with all Standard Features

Industrial Use Knott Jockey Wheel With Telescopic Retraction System. 

• 48mm Shaft Diameter. 
• 3500KG Max. Capacity.
• 350KG Max. Nose Load.
• Solid Rubber Wheel.
• Shaft Locking Pin To Stop Wheel Spinning During Transport.
• Zinc Plated Construction.
• Clamp Not Included.

Industrial Use Anti-Vibration Jockey Wheel With Telescopic Retraction System. 

• 3500KG Max Capacity.
• 350KG Max Nose Load.
• Solid Rubber Wheel.
• Spring Loaded Safety Bolt.
• Zinc Plated Construction.
• Clamp Not Included.

Shaft Diameter: 48mm
Closed Height: 590mm
Wheel Diameter: 225mm
Tyre Width: 56mm

The CT27167 is a car transporter trailer with a 2010kg carrying capacity and a 16' x 6.4'' trailer deck.

Price includes Car Transporter with all the Standard Features Plus a Manual Winch, Post & Strap.

The TD35166 is a wheels under, twin axle, tilting deck car transporter with a carrying capacity of 2725Kgs and a bed size of 16' x 6'8".

Price includes the Trailer with all the Standard Features Plus a Manual Winch, Post & Strap.

Industrial Anti-Vibration Jockey Wheel With Telescopic Retraction System. 

• 48mm Shaft Diameter.
• 3500KG Max. Capacity.
• 350KG Max. Nose Load.
• Shaft Locking Pin To Stop Unwinding During Transportation.
• Solid Rubber Wheel
• Ribbed Shaft
• Zinc Plated Construction
• Clamp Not Included

Want a Jockey Wheel that lasts and lasts? 
The JW070U has been specially developed for legendary reliabilty and long term use.

This Industrial strength, Anti-Vibration Jockey Wheel has the following features:

• 48mm Anti-Vibration Shaft Diameter.
• Smooth Winding Action
• Heavy Duty Bearing With Flush Mounted Greasing Point
• 6mm Steel Wall Thickness (Inner & Outer)
• Machined Billet Steel Fork
• Heavy Duty Castor Wheel 200x50mm Diameter
• Needle Bearings With Grease Nipple
• Polyurethane Tyre for Smooth Running

(Clamp Not Included)

Additional benefits include:

Fits standard 48mm clamp - no need to purchase expensive 63mm clamp

This jockey wheel is perfect for heavy trailer applications such as catering and exhibition units. It won't bend, leaving you unable to move the trailer.

Industrial use, anti-vibration jockey wheel with telescopic retraction system.

• 63mm Shaft Diameter
• 3500kg Max Capacity
• 750kg Max Nose Load
• Castor Style Nylon Wheel
• Locking Pin To Stop Shaft Unwinding During Transport
• Zinc Plated Construction
• Clamp Not Included

The Indespension Box Vans Utilise light weight materials and are constructed with modern adhesive technology, the TAV 1 is an unbraked 6' x 4' x 4' (LxWxH) single axle box van trailer.

Price includes the Box van with all the Standard Features Plus Spare Wheel including Carrier, Jockey Wheel.

Utilising light weight materials and constructed with modern adhesive technology, the TAV 3 is a braked 8' x 4' x 5' (LxWxH) single axle box van trailer.

Price includes Box Van with all Standard Features Plus Spare Wheel including Carrier.

• Buyer to Collect

Smooth shaft steel clamp for jockey wheel and prop stand with 34mm grip diameter.

Smooth shaft steel clamp for jockey wheel and prop stand with 42mm grip diameter.

Utilising light weight materials and constructed with modern adhesive technology, the TAV 4 is a braked 8' x 5' x 5' (LxWxH) twin axle box van trailer.

Price includes Trailer with all the standard features Plus Spare Wheel including Carrier, Two Prop Stands.

Utilising light weight materials and constructed with modern adhesive technology, the TAV 4 HIGH is a braked 8' x 5' x 6'1" (LxWxH) twin axle box van trailer.

Price includes Trailer with all Standard Features Plus Spare Wheel including Carrier, Two Prop Stands.

Smooth shaft steel clamp for jockey wheel and prop stand with 48mm grip diameter.

Superior quality smooth tube jockey wheel and prop stand clamp to suit 23mm grip diameter.

10' x 5'6" Flatbed Trailer Manufactured By Indespension.

Price includes Trailer with Standard Features Plus Fitted Spare Wheel, Dropsides including Headboards.

10' x 6'6" Flatbed Trailer Manufactured By Indespension

Price includes Trailer with all the Standard Features Plus, Fitted Spare Wheel, Drop Sides Incl. Head Board.

Buyer to Collect

Smooth tube cast clamp to suit jockey wheel and prop stand 34mm grip diameter.

Smooth tube cast clamp to suit jockey wheel and prop stand 42m grip diameter.

12' x 6'6" Flatbed Trailer Manufactured By Indespension.

Price includes Trailer with all the Standard Features Plus Fitted Spare Wheel, Drop Sides Inclu. Head Board.

14' x 6'6" Flatbed Trailer Manufactured By Indespension.

Price includes Trailer with all the Standard Features Including dropsides inclu. Head Board

Anti-vibration jockey wheel and prop stand clamp to suit 48mm grip diameter.